Above, you'll find the main brand names you'll recognise, covering modern tumble dryers sold in the UK. Each section also includes more brands that aren't especially major household names.
Each manufacturer section is organised around the areas we're asked for most — heating elements, belts, bearings, control modules and so on — so you can go straight to the part rather than trawling the full range. Anything common enough to earn its own section has one.
Tumble Dryer Spare Parts Complexity
Tumble dryers come in three quite different types — vented, condenser and heat pump — and the same model name can be sold in more than one of them. Before the model number even comes into play, it's worth knowing which type you have, because the parts inside have very little in common.
On top of that, makers revise components mid-production—a different belt, a revised heating element, a changed door switch—without changing the model number. The product code and serial number are what pin down the specific build you own, and without them it's easy to end up with a part that fits the range but not your machine. More on why this happens here.
We know — it's more involved than it ought to be.
The quickest way round it is to send us the rating plate details — usually inside the door or on the rear panel — or a photo of the plate. From that we can trace the exact build and confirm the correct part before you order it.
One practical note while you're here: tumble dryers are the appliance we see most often with lint building up inside the cabinet, around the heater and in the ducting. If you're replacing a heating element or a belt, it's worth clearing that out at the same time. It costs nothing, and it's one of the most common causes of poor drying and, in the worst cases, of fires.
Different Brands, Same Tumble Dryer Parts
Belts, bearings, door seals and heating elements rarely belong to one badge. The same part turns up across a spread of names, because the plants that build tumble dryers supply several brands from the same line — some of which were never sold in the UK.
It can be puzzling from the outside. Two dryers sitting side by side in a showroom, with nothing visually in common, may share the same drum bearing or door catch.
The caveats above still apply, but the savings come from the overlap. The identical belt or element is often listed at very different prices depending on the name on the packaging, and we identify the cheaper route to the same component as standard.
That said, tumble dryers do have one wrinkle worth flagging: a cheap belt that fits is not always a good belt. The genuine or OEM-equivalent part lasts considerably longer, and on a machine that runs hot and cycles constantly, that difference shows up quickly. Where there's a meaningful quality gap between options, we'll say so rather than just pointing you at the lowest number.
