Compatible Door Handle
Replacement fridge freezer door handle – compatible with Beko fridge & fridge freezer models as shown unless advised otherwise
Description
A fridge freezer door handle takes more punishment than almost any other part of the appliance. It is the single point of contact every time the door is opened or closed, often while hands are wet, full, or in a hurry.
This replacement handle matches the original part's specifications and performance, so it fits the existing mounting points, matches the door profile, and restores the easy, positive grip the appliance had when new. Made from durable, impact-resistant plastic with a white finish, it is designed to withstand daily temperature changes and the constant pull of a loaded fridge or freezer door.
The most common failure is a handle that cracks or snaps where it joins the door. This usually happens gradually: the plastic becomes brittle over time, and a moment of extra force — pulling the door open when the seal is cold and stiff, or catching the handle on a sleeve or bag — is enough to break it. A cracked handle is not just inconvenient. Once it starts to fail, the mounting points can work loose, and continued use can damage the door panel or the fixings themselves. Replace a handle that wobbles or feels loose before it breaks completely, as a loose handle puts stress on the door seal and can prevent the door from closing properly.
Watch for visible cracks around the handle fixings, a handle that feels loose or wobbles when pulled, or a handle that has come away from the door entirely. In some cases, the handle can also become stiff or difficult to operate if the mounting has shifted or if debris has collected behind it. Because the handle is the door's primary grip, failure here can cause the door to pull open unevenly, which puts strain on the hinges and can affect the door seal. Replacing the handle is a straightforward DIY task that restores proper door operation and protects the rest of the door assembly from unnecessary stress.
This fridge freezer door handle will only fit the models shown or specifically advised and will not fit any others, even if they look the same; they probably won't, as several look alike but aren't compatible. Please take time to ensure this is correct before ordering. If you are unsure, please don't hesitate to contact us and ask for assistance.
Technical Notes
Specifications: Compatible fridge freezer door handle. Product code: HAN105. Material: impact-resistant plastic. Colour: white. Fixing type: M5x25 screws (not included). Compatible with Beko fridge & fridge freezer models as listed. Handle type: grab bar / pull handle.
Safety note: Isolate the appliance from the mains supply before carrying out any work. Allow the appliance to reach room temperature before handling plastic components, as cold plastic is more brittle and prone to cracking. Do not overtighten the fixing screws, as this can crack the handle or damage the door panel. Ensure the handle is securely fitted before applying force, and test the door operation carefully after fitting.
BEKO FRIDGE & FRIDGE FREEZER
LXD6145B, TLDC671S, TFFC671S, FXF6107B, LXD6155S, FXF6118S, CFD63S, CFD63B, CXFD6113W, TL654APS, TL654S, CFD64S, COOL64FDS, CXFD6114B, CFD64B, COOL64FDB, CN142220D, CS131020, TFF654APS, TFF654S, TLD673APS, TLD673APB, TFF673APS, TFF673APB, CF64S, COOL64FS, CXF6114S, CXFD6113S, CFD6913S
Get Expert Fridge Freezer Spare Part Help
Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.
| Further Description |
Common Faults & SymptomsThe following symptoms are commonly reported when a Beko fridge freezer door handle begins to fail. Use this as a diagnostic guide before ordering a replacement — if more than one of these is present, the handle is the likely culprit. 1
VISIBLE CRACKS OR SPLITS IN THE HANDLE
The most common failure. Cracks usually appear at the points where the handle joins the door, radiating outwards from the fixing holes. Once a crack opens, the handle loses its strength and can snap completely under the next firm pull.
2
HANDLE FEELS LOOSE OR WOBBLES WHEN PULLED
A handle that moves independently of the door has loose or worn fixings. This puts uneven stress on the mounting points and can enlarge the fixing holes in the door panel if left unrepaired. It may also be a sign that the fixing screws have worked loose and need tightening or replacing.
3
HANDLE HAS SNAPPED OR COME AWAY FROM THE DOOR
A completely broken handle leaves the door with no grip, making it difficult to open. Forcing the door open by the edge or by gripping the door itself can damage the seal and the hinges, so a snapped handle should be replaced promptly.
4
HANDLE FEELS STIFF OR DIFFICULT TO PULL
A handle that is stiff to operate may be binding against the door panel or have debris trapped behind it. This can also be caused by the handle being slightly misaligned after a previous repair or by the door seal becoming stiff and requiring more force to break the seal.
5
DOOR DOES NOT CLOSE PROPERLY OR SEAL IS COMPROMISED
A loose or broken handle can cause the door to be pulled open unevenly, which over time can distort the door or damage the seal. If the door is not closing flush, the handle should be checked along with the hinges and seal, as the handle is often the first component to be affected.
6
FIXING SCREWS STRIPPED OR FIXING HOLES ENLARGED
If the handle has been loose for some time, the fixing screws can strip their threads or the holes in the door panel can become enlarged. In this case the handle may need to be replaced along with the screws, and the holes may need to be checked for damage before fitting a new handle.
7
HANDLE DISCOLOURED, SCUFFED OR WORN
Over time the plastic can become scuffed, discoloured or marked, particularly on white handles that are handled with dirty or wet hands. While this is primarily cosmetic, a heavily worn handle can also have weakened mounting points and may be more prone to cracking.
8
HANDLE CATCHES ON CLOTHING OR SURROUNDING OBJECTS
If the handle is loose or has shifted, it can protrude further than intended and catch on clothing, bags or nearby surfaces. This increases the risk of accidental damage and can be a sign that the handle is no longer correctly seated on its mountings.
Fitment GuidanceThis part is compatible only with the models listed in the compatibility matrix above. Even if a part looks visually identical, internal specifications can differ.
Diagnostic TipsBefore concluding that the part has failed, carry out these checks to rule out other causes.
Installation GuideThese steps describe the general procedure. The exact sequence varies between models, so always consult the appliance service manual where available.
Before Ordering, Check These First
Disclaimer: The fault codes and symptoms listed above are intended as a general guide to assist with diagnosis. They cannot be taken as a definitive diagnosis of any particular problem, and other components may produce similar symptoms. Always confirm the fault with proper testing before ordering parts. |
|---|---|
| Alternate Part Number | QUAHAN105, C00864810, 4900061200, BEK4900061200, 5045382196380, BEKBE4900061200, F90034, 5205651 |
| EAN Number | 5056145310103 |
| Manufacturer | Low Cost Spare Parts |
| Genuine Part | Alternative |
Fridge & Freezer Spare Parts.
Refrigeration components are highly model-specific. Don't rely on generic user manuals which cover entire ranges; locating your precise rating plate is the only way to guarantee fitment.
Locating the Rating Plate
In fridges, check the inner side walls near the salad crisper. In freezers, the sticker is often located behind the lower storage baskets. This data plate is vital for both genuine and compatible sourcing.
Technician-Curated
We only list parts that our engineers actually use or customers frequently request. This prevents you from sifting through thousands of irrelevant components that never fail, making the search fast and relevant.
! Images & Sizes for Information Only
Component parts may vary in shape, size, or terminal layout from the images shown. Manufacturers frequently update designs or alter production specifications without notice.
CRITICAL: Many refrigeration parts look identical but are position-specific or used in thousands of variations. Do not rely on visual comparison—verify via model data or ask us first.
Get it Right, First Time.
Ordering the wrong refrigeration part is a major hassle. We want to help you avoid the cost and inconvenience of incorrect fitment.
Emailing us allows our experts to send technical drawings and diagrams directly to you. It is the most reliable way to identify parts and find money-saving alternatives.
Unsure of compatibility?
Don't be hasty. One wrong digit leads to the wrong part!
Verify With An ExpertProfessional Diagnosis • SPARE PARTS Sourcing • Established 1988
Cost-Effective Spare Parts
Save Money On
Spare Parts.
Cost-compatible spare parts are not generic “one-size-fits-all” items. They fall into several categories, and care must be taken to ensure the replacement is fully appropriate for your appliance.
How Compatible Parts Work
Most cost-compatible parts are the same components originally used by the manufacturer but sourced from a different supplier. Often, the brand on your appliance did not manufacture every part themselves. Clever sourcing allows us to provide the exact same part — at a lower cost — sometimes even using a different manufacturer’s part number.
Choosing The Right Replacement
Some compatible parts are excellent, offering the same performance as the original. Others are very cheap but may fail quickly. We evaluate parts before listing and provide guidance so you can avoid low-quality replacements.
Obsolete or Universal Parts
Some original parts are no longer available, so compatible alternatives are the only option. Universal parts may also be used. We only list replacements we trust to ensure quality and fit, protecting you from poor-performing components.
Get Expert Guidance
Contact our technical team for advice on compatible spare parts. We’ll help you select the correct replacement, saving you money while avoiding mistakes and delays.
Contact Support TeamCost-Compatible Parts • Quality Verified • Established 1988
UK'S Professional Appliance Spare Part Network • Established 1988
Delivery & Returns Information.
We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.
Stock Availability
Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.
Tradesman Warning
Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.
Understanding Lead Times
Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.
Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.
Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.
Order Transit
Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.
We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.
Heavy/Oversized Items
Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.
Returns Policy
Damages
Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.
Cancellations
You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).
Exclusions
We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.
How to Return an Item
Contact us with your order number and reason for return.
Wait for instructions and the correct returns address (this varies by item).
Package carefully. Do not deface original packaging. Use tracked post.
Have questions about your delivery or a potential return?
Contact Support Team98% of orders delivered on time • Expert Resolution • Established 1988
