Fridge Freezer Door Handle
Genuine fridge freezer door handle – identical to the original factory-fitted handle for Beko fridge & fridge freezer models as shown unless advised otherwise
Description
The fridge freezer door handle is the single component every member of the household touches hundreds of times a year, often with wet or full hands, and it is built to take that punishment without complaint.
This is a genuine Beko handle, identical to the original fitted at the factory, so it matches the door profile exactly, uses the existing mounting points and restores the solid, positive grip the appliance had when new. It is manufactured from metal with a silver finish and an oxidation-resistant coating, giving it the strength to handle the daily pull of a loaded door and the durability to resist the scuffs and marks that accumulate over years of use. When the original handle cracks or comes loose, the whole door becomes awkward to open, and the strain shifts to the seal and hinges — fitting the correct genuine part fixes that immediately.
The usual cause of failure is a crack at the mounting bosses, where the handle joins the door. The metal is at its thinnest around the fixing points, and repeated force — especially when the door seal is cold and stiff — gradually opens a split that grows until the handle snaps or comes away completely. A handle that feels loose or wobbles is at the earlier stage of the same problem, and tightening the screws often provides only temporary relief because the underlying damage is already present. In some cases, the fixing screws strip or the holes in the door panel enlarge, which means a replacement handle and fresh fixings are the only reliable repair.
Watch for visible cracks around the handle fixings, the handle moving independently of the door, difficulty pulling the door open, or the handle catching on clothing and nearby surfaces. Because the handle is the primary grip, any looseness changes how force is applied to the door, which can distort the door panel over time and affect how well the seal sits. Checking the handle regularly and replacing it as soon as damage appears avoids a more expensive repair later. The handle is a direct fit, so no modification or adaptation is required.
This fridge freezer door handle will only fit the models shown or specifically advised and will not fit any others, even if they look the same; they probably won't, as several look alike but aren't compatible. Please take time to ensure this is correct before ordering. If you are unsure, please don't hesitate to contact us and ask for assistance.
Technical Notes
Specifications: Genuine Beko fridge freezer door handle. Product code: 4900061200. Length: 260mm. Hole spacing: 230mm. Colour: silver. Material: metal with oxidation-resistant finish. Weight: 140g. Fits Beko fridge & fridge freezer models as listed.
Safety note: Isolate the appliance from the mains supply before working on the door. Allow plastic and metal components to reach room temperature before handling, as cold materials are more brittle. Do not overtighten fixing screws, as this can crack the handle or damage the door panel. Test the door operation carefully after fitting.
BEKO FRIDGE & FRIDGE FREEZER
LXD6145B, TLDC671S, TFFC671S, FXF6107B, LXD6155S, FXF6118S, CFD63S, CFD63B, CXFD6113W, TL654APS, TL654S, CFD64S, COOL64FDS, CXFD6114B, CFD64B, COOL64FDB, CN142220D, CS131020, TFF654APS, TFF654S, TLD673APS, TLD673APB, TFF673APS, TFF673APB, CF64S, COOL64FS, CXF6114S, CXFD6113S, CFD6913S
Get Expert Beko Spare Part Help
Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.
| Further Description |
Common Faults & SymptomsThe following symptoms are commonly reported when a Beko fridge freezer door handle begins to fail. Use this as a diagnostic guide before ordering a replacement — if more than one of these is present, the handle is the likely culprit. 1
VISIBLE CRACKS OR SPLITS AT THE FIXING POINTS
The mounting bosses are the weakest part of the handle and the first place to fail. Cracks usually start at the screw holes and spread outwards, and once a split opens the handle loses its strength and can snap under the next firm pull.
2
HANDLE FEELS LOOSE OR WOBBLES WHEN PULLED
A handle that moves independently of the door has loose or worn fixings. This puts uneven stress on the mounting points and can enlarge the fixing holes in the door panel if left unrepaired. Tightening the screws may help temporarily, but if the handle has already cracked, replacement is the only lasting fix.
3
HANDLE HAS SNAPPED OR COME AWAY FROM THE DOOR
A completely broken handle leaves the door with no grip, making it difficult to open. Forcing the door open by the edge or by gripping the door itself can damage the seal and the hinges, so a snapped handle should be replaced promptly to avoid further damage.
4
HANDLE FEELS STIFF OR DIFFICULT TO PULL
A handle that is stiff to operate may be binding against the door panel or have debris trapped behind it. This can also be caused by the handle being slightly misaligned after a previous repair or by the door seal becoming stiff and requiring more force to break the seal.
5
DOOR DOES NOT CLOSE PROPERLY OR SEAL IS COMPROMISED
A loose or broken handle can cause the door to be pulled open unevenly, which over time can distort the door or damage the seal. If the door is not closing flush, the handle should be checked along with the hinges and seal, as the handle is often the first component to be affected.
6
FIXING SCREWS STRIPPED OR FIXING HOLES ENLARGED
If the handle has been loose for some time, the fixing screws can strip their threads or the holes in the door panel can become enlarged. In this case the handle may need to be replaced along with the screws, and the holes may need to be checked for damage before fitting a new handle.
7
HANDLE DISCOLOURED, SCUFFED OR WORN
Over time the metal can become scuffed, discoloured or marked, particularly on handles that are handled with dirty or wet hands. While this is primarily cosmetic, a heavily worn handle can also have weakened mounting points and may be more prone to cracking.
8
HANDLE CATCHES ON CLOTHING OR SURROUNDING OBJECTS
If the handle is loose or has shifted, it can protrude further than intended and catch on clothing, bags or nearby surfaces. This increases the risk of accidental damage and can be a sign that the handle is no longer correctly seated on its mountings.
Fitment GuidanceThis part is compatible only with the models listed in the compatibility matrix above. Even if a part looks visually identical, internal specifications can differ.
Diagnostic TipsBefore concluding that the part has failed, carry out these checks to rule out other causes.
Installation GuideThese steps describe the general procedure. The exact sequence varies between models, so always consult the appliance service manual where available.
Before Ordering, Check These First
Disclaimer: The fault codes and symptoms listed above are intended as a general guide to assist with diagnosis. They cannot be taken as a definitive diagnosis of any particular problem, and other components may produce similar symptoms. Always confirm the fault with proper testing before ordering parts. |
|---|---|
| Alternate Part Number | BEK4900061200, 5045382196380, BEKBE4900061200, F90034, 5205651 |
| EAN Number | 7426902477826 |
| Manufacturer | BEK |
| Genuine Part | Yes |
Fridge Freezer
Door Handles
Door handles are wear-and-tear items that can become loose, worn, or broken over time. Complex handles with moving parts may wear faster, especially with frequent use.
About Fridge Freezer Door Handles
Most door handles are range-specific and can sometimes be model-specific. Choosing the wrong replacement may result in an incompatible fit. Always check your fridge or freezer model before ordering.
Handles with hinge mechanisms can make opening doors easier, particularly for those with limited strength. These moving parts wear over time, so the quality and longevity depend on the type and frequency of use.
Ordering solely by images is highly discouraged. Many handles look identical but can vary in size, mould, or design. Mistakes in ordering are common and can cause unnecessary hassle and cost.
Need Help Finding Door Handles?
Contact us with your fridge or freezer model, serial number, or a photo of the handle. We can identify the correct replacement and offer compatible, low-cost options.
Contact Support TeamBeko
Spare Parts.
Beko produces appliances across multiple variants, and identification of the correct spare parts often requires the model number and, in some cases, the product code or serial number. Many parts are shared across brands owned or produced by Beko, including Hotpoint, Whirlpool, Blomberg, Grundig, and Flavel.
Correct Model Identification Is Essential
To find the correct Beko spare parts, you will need at least the model number. Some appliances also require the product code or serial number for precise identification. The rating plate contains this key information, including the manufacturing date.
Variant & Modification Awareness
Some Beko spare parts have been modified over time, so the replacement part may differ visually from the original. Careful identification using the model, product code, and serial number is essential to ensure the correct fit.
Confirm Your Beko Spare Parts
Provide the model number, product code, and/or serial number or a photo of the rating plate from your appliance, and our technical team will confirm the correct Beko spare parts for your appliance quickly and accurately.
Contact Support TeamTurkish Manufacturer • Multi-Brand Parts • Verified Fitment • Established 1988
UK'S Professional Appliance Spare Part Network • Established 1988
Delivery & Returns Information.
We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.
Stock Availability
Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.
Tradesman Warning
Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.
Understanding Lead Times
Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.
Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.
Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.
Order Transit
Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.
We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.
Heavy/Oversized Items
Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.
Returns Policy
Damages
Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.
Cancellations
You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).
Exclusions
We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.
How to Return an Item
Contact us with your order number and reason for return.
Wait for instructions and the correct returns address (this varies by item).
Package carefully. Do not deface original packaging. Use tracked post.
Have questions about your delivery or a potential return?
Contact Support Team98% of orders delivered on time • Expert Resolution • Established 1988
