Description

This genuine tumble dryer thermostat kit directly replaces the original temperature control components in a wide range of Hotpoint, Indesit, Creda, Ariston, and many other tumble dryers. The kit includes two thermostats: a 106°C operating thermostat that regulates the drying temperature, and a 130°C one-shot safety cut-out thermostat that trips if the dryer overheats.

Generally, when these thermostats fail, you will get a "no heat" fault in your dryer, and you must replace both at the same time.

Please remember, the green spot thermostat is a "one-shot" safety device and if your dryer overheats, it will "trip" or go open circuit. This cannot be reset, and a replacement set will need to be fitted again. If this happens after a short period, there may be an underlying problem that needs to be resolved; simply replacing the kit again and again is NOT the answer. One-shot devices obviously carry no guarantee for the reasons stated above.

Do beware of cheap copies of this and other thermostat kits. The cheap ones are not of the same quality and have issues – we gave up selling them due to a high failure rate. This kit is the only pattern copy that we've found to have no issues and be of an acceptable standard.

This genuine spare part is manufactured to original equipment specifications, guaranteeing a precise fit and reliable performance. You can find the compatible thermostat set in the related items.

Technical Notes

This thermostat kit is also listed as C00095566, HPTC00095566, QUATOC40, THM9380, 1701583, 095566, 57X1415 and C00112196.[

Technical Specifications:
• Includes two thermostats: 106°C operating thermostat and 130°C one-shot cut-out thermostat
• The 130°C thermostat is a one-shot safety device that cannot be reset once tripped
• Designed for use on 6kg condenser tumble dryers after date code 65 (May 1999)
• Package dimensions: approximately 14.2 x 9.3 x 1.3 cm

Fault Code Information
When these thermostats fail, the most common symptom is a "no heat" fault – the dryer runs but produces no heat, leaving clothes wet at the end of the cycle.
If the 130°C one-shot thermostat has tripped, the dryer may have overheated due to a blocked filter, restricted airflow, or a faulty control thermostat. The dryer will not heat until the kit is replaced. 
Some models may display error codes such as F01, F02 or F10, or the machine may simply stop heating with no error displayed.

This thermostat kit is model‑specific and will only fit the tumble dryer models listed below. It will not fit any other appliance, even if it appears visually similar, as several variants exist that are not interchangeable.

Please note that this thermostat kit fits many, many more models – if you are unsure, don't see your model listed or you need another part for one of the listed models that isn't listed then please contact us for more information.

Please verify your exact model number against the list before ordering. If your appliance is not listed, please provide your full model and serial number for verification.

TC71N, TC71P, TC71PE, TC71X, TC72N, TC72P, TC72PE, TC72X, TCM65A, TDC30N, TDC30P, TDC30S, TDC30YS, TDC32N, TDC32P, TDC32S, TDC60N, TDC60P, TDC60S, TDC60YS, TDC62N, TDC62P, TDC62S

G74C, G75C, G75CEX, G75CFR, G75CS, G75CSK, G85C, G85CEX, G85CNL, G85CSK, A37CEX, A46CEX, A46CFR, A46CSK

37630, 37747, 37764E, 37765X, 37774E, T601CW, T602CW, T620CW, T622CW, T630CW, T632CW, TCR13, TCR14, TDC30PE, TDC60PE

A37CEX, A46CAUS, A46CEX, A46CFR, A46CSK

A37CEX, A46CAUS, A46CEX, A46CFR, A46CSK

MAXI60T, MAXI65E

TR999EB

TR999EC, WT60101, WT6030

37667, CT61C

1SE6C

TD41, TD410RS, TD46

37527

SF206C

DDE7609FWW, DDE7702VWW, DDE7709FWW

J601CW

SLC60, SLC70, TDC6A

SL602FCE

D58

37681, SW62C