Description

Restore your condenser tumble dryer to full working order with this genuine water tank.

As an original component, it matches the tank fitted at the factory in capacity, shape, and mounting design. The tank collects the condensed water extracted from the laundry during the drying cycle and slides into its housing in the top or rear of the appliance.

Made from durable, food-safe plastic, it is designed to withstand daily emptying and refilling without cracking or leaking. As a genuine part, it fits the intended models exactly as the original did, with no risk of misalignment or leaks that can occur with poorly matched alternatives.

This container is only known to fit the models shown or as advised and will not fit any others, because even if it looks the same, it probably won't. There will often be several that look alike yet are not; please take time to ensure this is correct before ordering. If you are unsure, please don't hesitate to contact us and ask for assistance.

Water tanks commonly fail through cracks or splits that develop around the seams, handles or base, or through damage to the integrated float mechanism that tells the dryer when the tank is full. Typical symptoms include water leaking from the tank housing, the tank not seating correctly in its slot, the dryer stopping mid-cycle with a tank-full warning even when the tank is empty, or visible cracks in the plastic that worsen over time. Replacement is the reliable solution, and this genuine tank matches the original part's specifications and performance.

Technical Notes

Specifications: Genuine tumble dryer water tank (condenser water container). Material: durable, food-safe plastic. Colour: clear with grey fittings. Capacity: approximately 4–5 litres depending on model. Supplied with integrated float mechanism where applicable. Product code: 40006253. SKU: 49125480-1.

Safety note: No electrical connection is required for this part. Always disconnect the appliance from the mains supply before removing or refitting the tank. Empty any residual water before handling, as the tank can be heavy when full. Do not force the tank into its housing, as excessive pressure can damage the tank or the locating slots.

Fitment guidance: This water tank fits only the Caple, Candy, Hoover, Lamona, Otsein and Zerowatt tumble dryer models listed in the compatibility matrix below. Model numbers can be found on the rating plate on the inner edge of the door or on the rear panel of the appliance.

CAPLE TUMBLE DRYER

TDi4000

CANDY TUMBLE DRYER

CSC9DE47, CSH8A2DE-47, CSH9A1LES, CSH10A2DE47, DMCD1013B80, DMCD1013BC80, DMCD1013BXS, DMCD10AVB80, DMCGD1013B84, DMHD1013A280, DMHD1013A2X07, DMHD1013A2XS, DNCD813B80, DNCD813BC80, DNCD913B80, DNCD913BXS, DNCGD813B84, DNCGD913B84, DNHD813A1XS, DNHD813A280, DNHD813A284, DNHD8513AXAUS, DNHD913A284, DNHD913A2C80, DNHD913A2XS, DYC71013NBXS, DYC710AVBX80N, DYC8913BX, DYC9445BX, DYC9813AXS, DYC9913AX30, DYC9913AXXS, DYC9914AXS, EVOC1379NXB, EVOC1379NXB47, EVOC1379XB, EVOC1379XB47, EVOC5810NB, EVOC5810NBS, EVOC5913B, EVOC5913B47, EVOC5913NBX, EVOC5913NBX47, EVOC7910NBS, EVOC8813AB, EVOC8813AB47, EVOC9813NA1, EVOC9813NA1X, EVOC9813NA1X47, EVOC9813NA147, EVOC9813NA2X, EVOC9813NA2X47, EVOC9813XA, EVOC9813XA47, EVOC981AS, EVOC981A-S, GCC51013NB, GCC51013NB-47, GCC51013NB47, GCC6912PPB, GCC6912PPB47, GCC6912PPNB, GCC6912PPNB-47, GCC6912PPNB47, GCC7913NB, GCC7913NB47, GCC7913NBS, GCC7913NBS-47, GCC7913NBS47, GCH9813NA1S, GCS91013A2S, GCS91013A2-S, GCS9913A1S, GCS9913A1-S, GOC1379XB, GOC79132XB, GOC7913C-12, GOC7913XB, GVC71013NB-S, GVC71013NBS, GVC71013NBX, GVC71013NBX47, GVC7810NB, GVC7810NB47, GVC7813NBX47, GVC7913NB-S, GVC7913NBS, GVC7913NBX, GVC7913NBX47, GVCD1013B-80, GVCD1013B80, GVCD1013B-S, GVCD1013BS, GVCD1013BX, GVCD1013BX-47, GVCD1013BX47, GVCD813B, GVCD813B-47, GVCD813B47, GVCD813B-S, GVCD813BS, GVCD913B-S, GVCD913BS, GVCD913BX, GVCD913BX47, GVCD913BX-47, GVH9813NA1S, GVH9813NA1-S, GVH9913NA1X47, GVH9913NA2-S, GVH9913NA2S, GVH9913NA2X, GVH9913NA2X-47, GVH9913NA2X47, GVHD1013A2-S, GVHD1013A2S, GVHD813A1-S, GVHD813A1S, GVHD813A2S, GVHD913A2-80, GVHD913A280, GVHD913A2-S, GVHD913A2S, GVHD913A2X47, GVHD913A2X-47, GVSC10DES, GVSC8DCE47, GVSD913A2S, GVSHY9A2TCES, HADC8913BX47, ODNCD813B37, ODNHD913A237, ODMHD1013A2X37, SLCD813BS, SLHD1013A2S, SLHD813A2S, SLHD813A2X-47, SLHD813A2X47, SLHD913A2X, SLHD913A2X-47, SLHD913A2X47

HOOVER TUMBLE DRYER

DOHC7813B37, DOHC7913B37, DYC169A80, DYC8132BX80, DYC8713BXAUS, DYC8813B80, DYC8813BX84, DYC8813BXS, DYC8913B80, DYC8913BX47, DYC8913BX84, DYC8913BXS, DYC9445BX47, DYC9913AX80, DYC9913AXS, DYC9914AXS, EVOC981AS, GOC1379XB, GOC79132XB, GOC7913C12, GOC7913XB, DYC893B-80, VCD913BBC47, GVHD913A2BC80, DMCD10AVBB80, DNCD813BB80, DNCD913BB80, DNCD813BXBS, GCC7913NBB47, DNCD813BC80, DNCD813B80, DNCD913B80, DNCD913BXS, DNCGD813B84, DNCGD913B84, DNHD813A1XS, DNHD813A280, DNHD813A284, DNHD8513AXAUS, DNHD913A284, DNHD913A2C80, DNHD913A2XS, DOHC7813B-37, DOHC7913B-37, DXC85TCEX, DYC169A-80, DYC71013NBXS, DYC8132BX, DYC8713BX, DYC8713BX-AUS, DYC8813B-80, DYC8813BX, DYC8813BX-84, DYC8813BX-S, DYC8913B-80, DYC8913BX, DYC8913BX-84, DYC8913BX-S, DYC9713AX-AUS, DYC9813AXS, DYC9913AX-30, DYC9913AX-80, DYC9913AX-S, DYC9913AXXS, DYC9914AX-S, DYC9914AXS, DYH9913NA2XS, DYH999, HLEH10A2TCEX17, HLEH10A2DE S, HLEH8A2DE80

Can also be used on: DOHC 7813B37, DOHC 7813B-37, DOHC 7813NB-37, DOHC 7913B37, DOHC 7913B-37, DOHC 7913NB-37

LAMONA TUMBLE DRYER

TBC – Please check your model number with our team to confirm fitment.

OTSEIN TUMBLE DRYER

DOHC7813B-37, DOHC7913B-37

ZEROWATT TUMBLE DRYER

TBC – Please check your model number with our team to confirm fitment.

Get Expert Tumble Dryer Spare Part Help

Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.

More Info

More Information
Further Description	Common Faults & Symptoms The following fault codes and symptoms are commonly reported when this part begins to fail. Use this as a diagnostic guide before ordering a replacement — if more than one of these is present, the part is the likely culprit. 1 Water Leaking From the Tank Housing The most common symptom of a failed water tank. Water pools around the tank housing or drips down the front of the appliance during the drying cycle. This is usually caused by a crack in the tank body, a damaged seal around the outlet valve, or a split in the plastic seam. Before ordering a replacement, remove the tank and inspect it in good light for visible damage. 2 Error Code E04 or E4 (Candy / Hoover) — Water Tank Full Candy and Hoover tumble dryers may display E04 or E4 when the tank-full sensor is triggered, even though the tank has been emptied. This can be caused by a faulty float mechanism inside the tank, or by water not draining correctly from the condenser sump into the tank. Check that the tank is seated correctly and that the float moves freely before assuming the sensor itself has failed. 3 Tank Not Seating Correctly in Its Housing A warped or damaged tank may not slide fully into its housing, leaving a gap that prevents the tank-full sensor from operating correctly. This can cause the dryer to stop mid-cycle or to display a fault code even when the tank is empty. Check that the tank runners and the housing are clean and free from debris, and that the tank is the correct shape for the model. 4 Visible Cracks or Splits in the Tank Body Remove the tank and examine it in good light for cracks, splits or stress marks, particularly around the seams, the handle and the base. Even a hairline crack will worsen with the daily cycle of filling and emptying, and will eventually cause a leak. A cracked tank cannot be repaired reliably and should be replaced. 5 Float Mechanism Sticking or Not Moving Freely The float inside the tank tells the dryer when the tank is full and needs emptying. If the float becomes stuck, the dryer may continue running with a full tank, causing water to overflow, or it may stop prematurely when the tank is still empty. Remove the tank, empty it, and check that the float moves freely up and down. If it is jammed by debris or limescale, a replacement tank is the most reliable solution. 6 Dryer Stops Mid-Cycle With No Obvious Fault If the dryer stops partway through a cycle and no error code is displayed, the tank-full sensor may be triggering incorrectly. This can happen when the tank is not seated properly, when the float is stuck, or when water is not draining from the condenser into the tank. Check that the tank is correctly positioned and that the condenser drain path is clear before ordering a replacement. 7 Tank Difficult to Remove or Refit A tank that has warped or has damaged locating lugs can be difficult to slide in and out of its housing. Forcing a damaged tank can cause further damage to the housing and the sensor mechanism. If the tank no longer moves smoothly, inspect it for distortion and replace it if necessary. Fitment Guidance This water tank is compatible only with the Caple, Candy, Hoover, Lamona, Otsein and Zerowatt tumble dryer models listed in the compatibility matrix above. Even if a tank looks visually similar, the dimensions, the position of the outlet valve and the float mechanism can differ between models, so a part that appears to fit may not seat correctly or may trigger false tank-full warnings. The model number is usually found on a rating plate on the inner edge of the door or on the rear panel of the appliance. For Candy and Hoover models, the rating plate is often located on the rear panel or on the inner edge of the door frame. Compare the full model number against the compatibility list above, including any suffix after the forward slash. Check that the position of the outlet valve and the float mechanism on your existing tank matches those on this replacement. Lamona and Zerowatt models are shown as TBC. Contact our parts advisors with your full model number to confirm fitment before ordering. Diagnostic Tips Before concluding that the tank has failed, carry out these checks to rule out other causes. No specialist tools are required for a visual inspection. Visual inspection: Remove the tank and examine it in good light for cracks, splits or stress marks. Pay particular attention to the seams, the handle and the base. Float check: Empty the tank and check that the float moves freely. If it is stuck, clean around it and test again. A float that remains stuck will need a replacement tank. Seating check: Confirm that the tank slides fully into its housing without force and that it sits flush. A tank that does not seat correctly will not operate the sensor reliably. Condenser drain check: Confirm that water can flow freely from the condenser sump into the tank. A blocked drain path can cause water to back up and trigger false tank-full warnings. Seal and valve check: Inspect the seal around the tank outlet and the valve that connects to the condenser. A damaged seal can cause leaks even if the tank itself is sound. Sensor check: If the tank-full warning persists with a new tank, the sensor or its wiring may be at fault. Confirm that the sensor is not blocked or damaged before replacing further components. Installation Guide These steps describe the general procedure for replacing a tumble dryer water tank. The exact sequence varies between models, so always consult the appliance manual where available. Disconnect the appliance from the mains supply. Open the door and locate the water tank. On most models, the tank is located at the top of the appliance, behind a hinged flap or in a pull-out drawer at the top front. Pull the old tank out of its housing. If the tank contains water, empty it into a sink before handling it further. Inspect the tank housing and the condenser drain area for debris or blockages, and clean them if necessary. If the new tank is supplied with a separate float or seal, fit these to the tank before installation. Slide the new tank into its housing, ensuring it engages the runners and sits fully home. Do not force it — if resistance is felt, remove and check the alignment. Close the tank access flap or drawer. Restore the mains supply and run a short drying cycle to confirm that the tank collects water correctly and that no tank-full warning is displayed. Empty the tank and check for leaks around the housing after the first full cycle. Before Ordering, Check These First Verify your full model number against the compatibility list above, including any suffix after the forward slash. If your model is listed as TBC, contact our parts advisors with your full model number to confirm fitment before ordering. Check that the outlet valve and float mechanism on your existing tank match those on this replacement. Inspect the tank for visible cracks before ordering a replacement — a sound tank with a stuck float may only need cleaning. Confirm that the condenser drain path and the tank housing are clear of debris. Contact our parts advisors if any doubt remains about fitment before placing your order. Disclaimer: The fault codes and symptoms listed above are intended as a general guide to assist with diagnosis. They cannot be taken as a definitive diagnosis of any particular problem, and other components may produce similar symptoms. Always confirm the fault with proper testing before ordering parts.
Alternate Part Number	40006629, 40008542, 40006629, 5045176567686, CAN40008542, 40008549, 40009648, HVR40009648, HVR40008542, 5055004621855, 40006253, HVR49125480, 2.08.30.02-0
EAN Number	8713411202551
Manufacturer	CAN
Genuine Part	Yes

Specialist Drying Support

Tumble Dryer Spare Parts.

Finding the correct tumble dryer part starts with the rating plate. Do not rely on generic user guides, as internal components vary significantly even within the same model range.

Accessing the Rating Plate

The plate is usually located around the porthole opening or behind the door. It is designed to be accessible without moving your machine and contains the precise data needed for a match.

Efficient Filtering

We prioritise listing parts known to fail. This curated approach prevents you from being overwhelmed by irrelevant results and ensures technical accuracy for common repairs.

! Images & Sizes for Information Only

Tumble dryer components may vary in shape, size, or terminal configuration. Manufacturers frequently alter specifications mid-production without notice.

CAUTION: Many dryer spares look identical but serve different functions or fit different positions. Do not rely on visual matching—always verify with your model data.

Right Part, First Time.

Ordering the wrong part is a hassle and an unnecessary expense. We want to help you avoid the frustration of incorrect fitment.

Email allows us to exchange technical diagrams and photos. This is the fastest way to confirm your repair and find the cheapest compatible options available.

Need Sourcing Help?

Don't be hasty. One wrong digit leads to the wrong part.

Verify With An Expert

Expert Sourcing Knowledge • Technical Resolution • Established 1988

Manufacturer

Haier Group Specialist

Candy
Spare Parts.

The Candy Group was historically one of Europe’s most significant appliance producers. Now part of the global Haier Group, Candy machines share technical DNA with Hoover and various other international brands, requiring precision sourcing to ensure compatibility.

Information You Need

Candy appliances undergo frequent mid-production updates. To identify the correct spare part with total certainty, the Serial Number is increasingly mandatory. Visual appearance can be deceptive as technical specifications evolve over time.

Full Model Number

Industrial Code

Serial Identification

Decades of Expertise

Our relationship with Candy spans over 30 years. We understand the technical nuances of their older Italian-built machines as well as the modern Haier-platform units. This legacy knowledge is vital for identifying functional spares that actually fit.

Verified Suitability

Don’t rely on visual comparison alone. Functional components like thermostats, heating elements, and electronic modules can vary by batch. Our standing advice: ask our specialists to confirm fitment if you are unsure before ordering.

Confirm Your Candy Spares

Don’t risk ordering the wrong part for your machine. Our technical helpdesk can cross-reference your serial number against the entire global Haier database to find the exact component you need.

Contact Support Team

Candy Technical Expert • Haier Group Platform Specialist • Established 1988

Resources

NWAR SUPPORT

Spare Parts Help

Identifying technical spares can be a minefield. Our specialist help desk is available via email to cross-reference your model and identify the most cost-effective genuine or alternative options.

Avg. Response Under 60 Minutes

Service Type Expert Verification

Ask A Specialist

Or use the live chat widget below.

UK'S Professional Appliance Spare Part Network • Established 1988

Delivery/Returns

Logistics & Support

Delivery & Returns Information.

We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.

Stock Availability

Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.

Tradesman Warning

Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.

Understanding Lead Times

1 to ** Days

Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.

3 to ** Days

Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.

* to ** Days

Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.

Order Transit

Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.

We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.

Heavy/Oversized Items

Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.

Returns Policy

Damages

Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.

Cancellations

You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).

Exclusions

We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.

How to Return an Item

1

Contact us with your order number and reason for return.

2

Wait for instructions and the correct returns address (this varies by item).

3

Package carefully. Do not deface original packaging. Use tracked post.

Have questions about your delivery or a potential return?