Washing Machine Drum Bearing Repair Kit
Genuine replacement washing machine & washer dryer drum spider for machines from Indesit, Hotpoint, Ariston and more
Descripton
This drum bearing and spider kit will only fit the models as shown or as specifically advised and will not fit any others even if it looks the same and pease read the notes carefully.
Technical Notes
Important ! The models shown below in blue may also use the more uncommon 30mm bearings which is listed as 05HP32. This 35mm bearing and spider kit is far more common and almost always used on all models in blue but, they can use the 30mm kit on occasion.
This kit was used on the "WMA" type machines from October 2003.
To be certain that the correct kit is ordered, if you measure the inner diameter of the rear small bearing behind the pulley at the rear and it is approx 26mm then this kit will fit your washing machine. If it is smaller than this you will need the 30mm kit.
Ariston Washing Machine
A1235, A1436, A1636, A1636S, AVD149, AVL147, AVXXF129DE, AVXXF129EX, AVXXF137FR, AVXXF147FR, AVXXF149DE, AVXXF149EX, AVXXL105EX, AVXXL109EX, AVXXL109IT, AVXXL120FR, AVXXL127FR, AVXXL129EX, AVXXL149EX, AVXXL149IT
Bonman Washing Machine
WA212B, WA214B
Clatronic Washing Machine
WA212C, WA214C
Creda Washing Machine
W200FW, W220VW, WMA10PE, WMA30PE, WMA31PE, WMA32PE, WMA33PE
Fagor Washing Machine
F2086, F2106, F2126
General Electric Washing Machine
WWH0809FWW, WWH6709FWW, WWH7703FWW, WWH7709FWW, WWH8709FWW, WWH9709FWW, WWH9809FWW
Hotpoint Washing Machine
SCR11P, SCR33N, SCR33P, SCR33S, SCR33YS, SCR34N, SCR34P, SCR34S, SCR35N, SCR35P, SCR35S, SCR36N, SCR36P, SCR36S, SCR37N, SCR37P, SCR37S, SCR38N, SCR38P, SCR61N, SCR61P, SCR61S, SCR61YS, SCR62N, SCR62P, SCR62S, SCR63N, SCR63P, SCR63S, WMA10P, WMA11P, WMA12P, WMA13P, WMA20P, WMA22P, WMA30N, WMA30P, WMA30S, WMA31N, WMA31P, WMA31S, WMA32N, WMA32P, WMA32S, WMA33N, WMA33P, WMA33S, WMA33YS, WMA34N, WMA34P, WMA34S, WMA35N, WMA35P, WMA35S, WMA36N, WMA36P, WMA36S, WMA37N, WMA37P, WMA37S, WMA37YS, WMA40N, WMA40P, WMA40S, WMA42N, WMA42P, WMA44N, WMA44P, WMA44S, WMA46N, WMA46P, WMA46S, WMA48N, WMA48P, WMA48S, WMA50N, WMA50P, WMA50S, WMA52N, WMA52P, WMA52S, WMA54N, WMA54P, WMA54S, WMA56N, WMA56P, WMA56S, WMA58N, WMA58P, WMA58S, WMA5P, WMA60N, WMA60P, WMA60S, WMA60YS, WMA61N, WMA61P, WMA61S, WMA61YS, WMA62N, WMA62P, WMA62S, WMA62YS, WMA63N, WMA63P, WMA63S, WMA63YS, WMA64N, WMA64P, WMA64S, WMA66N, WMA66P, WMA66S, WMA74N, WMA74P, WMA74S, WMA76N, WMA76P, WMA76S, WMA9P, WMM39A, WMM53A, WMM59A, WMM65A, WMM75A, WMS38N, WMS38P, WMS38S, WMS39P, WMT01P, WMT02P, WMT03P, WMT05P, FEW12P, WF000G, WF000P, WF000T, WF100G, WF100P/SC, WF210G, WF210P, WF210T, WF215A, WF220G, WF220P, WF220T, WF225A, WF240P, WF250G, WF250P, WF310G/SC, WF310P/SC, WF310T/SC, WF320G/SC, WF320P/SC, WF320T/SC, WF325A/SC, WF340G/SC, WF340P/SC, WF350G, WF350P, WF355A, WF430G, WF430P, WF430T, WF440G, WF440P, WF530G/SC, WF530P/SC, WF530T/SC, WF540G/SC, WF540P/SC, WF540T/SC, WF545A, WF545A/SC, WF620G, WF620P, WF620T, WF630G, WF630P, WF640G, WF640P, WF640T, WF645A, WF720P/SC, WF730G/SC, WF730P/SC, WF740G/SC, WF740P/SC, WF740T/SC, WF745A/SC, WF840G, WF840P, WF840T, WF860G, WF860P, WF860T, WF865A, WMA57P
Get Expert Help
Can't find your model number listed or are unsure? Contact our parts advisors before ordering. We can check the parts network to verify your part first time.
| Alternate Part Number | HP05102, 1604600, C00254590, C00202544, 1604473, C00202418, 1604080, 160408077, 1603410, C00199338, 1605082, HP05103, HP05104, 1603409, C00119357, 1603913, 1604480, 160341077, C00112679, 1604770, C00202714, 05-HP-30, QUABKT85, BRG9177 |
|---|---|
| Manufacturer | Ind |
| Genuine Part | Yes |
Washing Machine
Drum Bearings
Drum bearings gradually fail as water seals wear and allow water to enter the bearing race. Replacing bearings early prevents damage to the drum, tub, or support spider, and ensures long-term washing machine reliability.
About Washing Machine Drum Bearings
Bearings wear as water penetrates the seals, leading to corrosion and failure. Noisy machines often indicate bearings approaching end-of-life. Always inspect the drum bush and tub seal when replacing bearings to prevent premature failure.
Some models may have variations in bearing type across production codes, and sealed drum assemblies can make replacement impossible without professional assistance.
Need Help Finding Washing Machine Bearings?
Bearings and their seals can vary depending on the washing machine model and production code. Contact us with your model and serial numbers, and we’ll identify the correct bearings and compatible alternatives.
Contact Support Team
Beko Europe Specialist
Indesit
Spare Parts.
Indesit was historically one of Europe’s largest appliance producers. Now part of the Beko Europe group, Indesit components are the "building blocks" for millions of appliances badged under various major household names.
The Technical Data Requirement
Production revisions for Indesit are constant. Identification by appearance alone is often impossible. To guarantee fitment, we require the Full Model, Industrial Code, or Serial Number from the machine’s rating plate.
Group-Wide Fitment
Many Indesit parts are shared across the Beko Europe portfolio. We use our technical legacy database to cross-reference these shared components, identifying the most cost-effective "group-standard" options to keep your appliances running efficiently.
Verified Suitability
As with modern vehicles, appliance parts change mid-production. Our standing advice: don’t order by image alone. If you cannot find your specific component, ask our specialists to cross-reference your serial number for a guaranteed fit.
Confirm Your Indesit Spares
Don’t risk ordering the wrong part for your machine. Our technical helpdesk can cross-reference your codes against the entire Beko Europe network to find the exact component you need.
Contact Support TeamIndesit Technical Expert • Beko Europe Network Specialist • Established 1988
UK'S Professional Appliance Spare Part Network • Established 1988
Delivery & Returns Information.
We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.
Stock Availability
Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.
Tradesman Warning
Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.
Understanding Lead Times
Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.
Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.
Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.
Order Transit
Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.
We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.
Heavy/Oversized Items
Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.
Returns Policy
Damages
Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.
Cancellations
You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).
Exclusions
We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.
How to Return an Item
Contact us with your order number and reason for return.
Wait for instructions and the correct returns address (this varies by item).
Package carefully. Do not deface original packaging. Use tracked post.
Have questions about your delivery or a potential return?
Contact Support Team98% of orders delivered on time • Expert Resolution • Established 1988