Door Handle Kit
Genuine replacement door handle kit – compatible with Hotpoint and Creda washing machines and tumble dryers as shown unless advised otherwise
Description
The door handle kit is a complete assembly that lets you open and close a washing machine or tumble dryer door securely. It typically includes the handle, latch mechanism, and associated fixings, and works with the door interlock switch to tell the appliance the door is safely shut before a cycle can begin.
On both washing machines and tumble dryers, the handle is one of the most heavily used components in the entire appliance, operated several times a day and subjected to constant pulling, pushing and twisting. A genuine replacement kit restores smooth, reliable door operation and ensures the latch engages correctly with the interlock, so the machine can start and run without interruption.
Handles fail in several recognisable ways. The most obvious is a handle that has cracked or snapped off completely, usually at the mounting points where the plastic is under the greatest stress. In other cases, the handle remains intact but feels loose and wobbly, because the internal latch mechanism has worn or the mounting screws have worked free. A handle that no longer latches properly will leave the door slightly ajar, and the machine will either refuse to start or stop mid-cycle because the interlock switch is not engaged. Some failures produce a clicking sound when you operate the handle, indicating the latch is moving but not catching.
Because door handles are highly model-specific, a handle that looks almost identical can have different latch geometry, mounting-hole spacing, or interlock engagement, so it is essential to match the full model number. This door handle kit is only confirmed to fit the models listed below and will not fit others even if they look similar.
Technical Notes
Specifications: Genuine door handle kit for Hotpoint and Creda washing machines and tumble dryers. The kit is manufactured from durable moulded plastic and metal components, and includes the handle, latch assembly and the necessary fixings required for a complete replacement. The handle is designed to match the original in shape, mounting hole spacing, latch geometry and interlock engagement. Product code: C00202401.
Fitment guidance: This door handle kit is confirmed for the Hotpoint and Creda models listed below. The model number is normally printed on the rating plate, which is found inside the door aperture, on the rear of the appliance, or on the frame behind the door seal. Match the complete model number, including any suffixes or slashes, and never order on appearance alone, as door handles that look almost identical can differ in latch dimensions and mounting points. Where a model number is not listed, please confirm fitment with our team before ordering.
Diagnostic tip: Before ordering, examine the handle and latch mechanism closely. Check for visible cracks, a handle that pulls away from the door panel, or a latch that fails to click into position. Operate the handle and listen for the interlock switch engaging. If the handle moves freely but the door does not latch, the fault may lie with the latch or interlock rather than the handle itself. If the machine will not start and the door appears closed, test the door interlock switch separately. A handle that is loose but not broken may only need tightening, so check the mounting screws before replacing the kit.
Installation guide: 1. Switch off and unplug the appliance, or isolate the circuit at the consumer unit. 2. Open the door and locate the screws or fixings that secure the handle to the door panel or inner door frame. 3. Remove the fixings, supporting the handle so it does not fall, and carefully pull the handle away from the door. 4. Disconnect any linkage or latch rod connected to the handle, noting how it is fitted. 5. Compare the new handle kit with the old one to confirm the latch and mounting points match. 6. Fit the new handle, reconnecting any linkage or latch rod in the same orientation. 7. Secure the handle with the fixings provided, tightening them evenly and taking care not to overtighten and crack the plastic. 8. Close the door and check that the latch engages securely and that the door interlock switch is activated. 9. Run a short cycle to confirm the appliance starts and completes without a door-related fault. 10. If the handle includes a latch adjustment, set it so the door closes firmly without excessive force.
Safety note: Always isolate the electrical supply before working on a washing machine or tumble dryer, as mains voltage is present inside the appliance even when the door is open. Allow the appliance to cool before handling the door area. Do not force the handle or latch into position, as this can crack the new component or damage the door panel. If the door interlock switch is found to be faulty, replace it at the same time, as a worn interlock can quickly damage a new handle.
CREDA TUMBLE DRYER
TDL11PE, TDL30IS, TDL30PE, TDL30PI, TDL31PE
CREDA WASHING MACHINE
WMA10PE, WMA30PE, WMA31PE, WMA32PE, W200FW/SC, W200FW/WE, W220VW/SC, W220VW/WE IWSC 51051 C ECO, IWC 71251, WISL 105, IWDC 6105, IWSC 61051, IWC 61051, WIDL 105
HOTPOINT TUMBLE DRYER
TDL10P, TDL11P, TDL11PE, TDL11PI, TDL12P, TDL13P, TDL14P, TDL15P, TDL30, TDL30IS, TDL30N, TDL30P, TDL30PE, TDL30PI, TDL30S, TDL31N, TDL31P, TDL31PE, TDL31S, TDL31YS, TDL32, TDL32N, TDL32P, TDL32S, TDL34N, TDL34P, TDL34S, TDL52, TDL52P, TDL54, TDL54P, TFA34, TFA34N, TFA34P, TFA34S, TFA53, TFA53P, TVM35, TVM35A, TVM55, TVM55A
HOTPOINT WASHING MACHINE
FEW10P/SC, FEW10P/WE, FEW12P/SC, FEW12P/WE, SCR11P, SCR33N, SCR33P, SCR33S, SCR33YS, SCR34N, SCR34P, SCR34S, SCR35N, SCR35P, SCR35S, SCR36N, SCR36P, SCR36S, SCR37N, SCR37P, SCR37S, SCR38N, SCR38P, SCR38S, SCR61N, SCR61P, SCR61S, SCR61YS, SCR62N, SCR62P, SCR62S, SCR63N, SCR63P, SCR63S, WMA10P, WMA11P, WMA12P, WMA13P, WMA20P, WMA22P, WMA30N, WMA30P, WMA30S, WMA31N, WMA31P, WMA31S, WMA32N, WMA32P, WMA32S, WMA33N, WMA33P, WMA33S, WMA33YS, WMA34N, WMA34P, WMA34S, WMA36N, WMA36P, WMA36S, WMA37N, WMA37P, WMA37S, WMA37YS, WMA40N, WMA40P, WMA40S, WMA42N, WMA42P, WMA42S, WMA44N, WMA44P, WMA44S, WMA46N, WMA46P, WMA46S, WMA48N, WMA48P, WMA48S, WMA60N, WMA60P, WMA60S, WMA60YS, WMA61N, WMA61P, WMA61S, WMA61YS, WMA62N, WMA62P, WMA62S, WMA62YS, WMA63N, WMA63P, WMA63S, WMA63YS, WMA64N, WMA64P, WMA64S, WMA66N, WMA66P, WMA66S, WMA74S
Get Expert Appliance Spare Part Help
Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.
| Further Description |
Common Faults & SymptomsThe following symptoms are commonly reported when this part begins to fail. Use this as a diagnostic guide before ordering a replacement — if more than one of these is present, the part is the likely culprit. 1
The Door Handle Has Snapped Or Broken Off
The handle cracks or breaks away from the door panel, usually at the mounting points where the plastic is under the greatest stress. This is the most obvious sign that the handle kit needs replacing, and the door may be impossible to open without using a tool or reaching the latch manually.
2
The Handle Feels Loose And Wobbles
The handle moves noticeably when pulled, even though it has not broken. This is often caused by mounting screws that have worked loose, or by a cracked internal bracket that is no longer holding the handle firmly. Tightening the screws may help temporarily, but a replacement kit is the permanent fix if the plastic is damaged.
3
The Door Will Not Latch Closed
The door does not stay shut, or it springs open again as soon as it is released. This points to a worn or broken latch mechanism within the handle kit. The latch may be moving but failing to catch, and the door interlock switch will not engage, preventing the machine from starting.
4
The Machine Will Not Start Because The Door Is Not Detected As Closed
The appliance appears dead when the start button is pressed, or it beeps and refuses to begin a cycle. Even though the door looks closed, the interlock switch has not been activated because the latch is not engaging fully. This is a common symptom of a faulty or misaligned handle latch.
5
The Door Is Difficult To Open Or Close
The handle feels stiff or jammed, and considerable force is needed to operate the door. This can be caused by a distorted latch, a build-up of detergent residue around the catch, or a handle mechanism that has worn internally. Forcing a stiff handle will eventually break it, so the cause should be investigated promptly.
6
A Clicking Noise When The Handle Is Operated
A distinct clicking sound is heard each time the handle is pulled, but the door does not latch properly. This usually indicates that the latch mechanism is moving but not engaging with the striker plate or interlock. The internal components of the handle kit are worn and replacement is the reliable solution.
7
The Door Drops Or Sags When Opened
The door feels heavy and drops slightly as it opens, or it does not sit square in the aperture. While this is often caused by worn hinges, it can also be a sign that the handle assembly is no longer supporting the door correctly. Check both the hinges and the handle mounting points for wear or damage.
8
The Handle Comes Away From The Door Completely
The handle detaches from the door panel, leaving the door unopenable by normal means. This requires immediate replacement of the handle kit. Check that the door panel itself is not cracked or damaged, as a damaged door may also need attention before the new handle can be fitted securely.
Before Ordering, Check These First
Disclaimer: The fault codes and symptoms listed above are intended as a general guide to assist with diagnosis. They cannot be taken as a definitive diagnosis of any particular problem, and other components may produce similar symptoms. Always confirm the fault with proper testing before ordering parts. |
|---|---|
| Alternate Part Number | 5031686584091, 482000030295, HPTC00202401 |
| Manufacturer | Hot |
| Genuine Part | Yes |
Washing Machine Spare Parts.
Locating your correct model number is the single most important step. Don’t rely on generic user manuals—they often cover multiple chassis types and internal variations.
Finding the Rating Plate
Check the porthole opening rim, the inside of the door, or behind the pump filter flap at the bottom. These are designed to be accessible without moving the machine.
Technical Filtering
We only list parts with a proven failure rate. This prevents you from being buried in hundreds of irrelevant results and highlights only what you actually need.
! Images & Sizes for Information Only
Component parts may vary in shape, size, or terminal configuration from the images shown. Manufacturers frequently alter specifications without notice.
WARNING: A huge proportion of laundry components look nearly identical but are totally incompatible. Do not order based on appearance alone—verify via model data or expert assistance.
Get it Right, First Time.
Ordering the wrong part is a hassle and an unnecessary expense. We want to help you avoid the frustration of incorrect fitment.
Email allows us to exchange technical diagrams and photos. This is the fastest way to confirm your repair and find the cheapest compatible options available.
Unsure about a part?
Don't be hasty. One wrong digit leads to the wrong part.
Verify With An Expert99% Accuracy Sourcing • Human Expertise • Established 1988
Beko Europe & Whirlpool Group Specialist
Hotpoint
Spare Parts.
Hotpoint remains Britain's most ubiquitous appliance brand. Following the 2005 Indesit acquisition and subsequent Whirlpool ownership, it is now part of Beko Europe. This legacy means components are shared across Hotpoint, Indesit, Ariston, and Whirlpool machines globally.
The Data Accuracy Requirement
Hotpoint production involves constant technical revisions. To guarantee fitment, we require the Full Model, Industrial Code, or Serial Number. A part that looks identical may have different terminal configurations or thermostat tolerances.
Group-Wide Fitment
Many Hotpoint parts are identical to those badged under Indesit or Whirlpool. We use our technical legacy database to cross-reference these shared components, often identifying more affordable "group-standard" options that keep your appliances running efficiently.
Verified Suitability
As with modern vehicles, appliance parts change mid-production. Our standing advice is to ask our specialists to confirm fitment if you are unsure. We provide manual verification to ensure that the part you receive is exactly what your machine requires.
Confirm Your Hotpoint Parts
Don't risk ordering the wrong part for your washing machine or oven. Our technical helpdesk can cross-reference your codes against the entire Beko Europe network to find the exact component you need.
Contact Support TeamHotpoint Technical Expert • Beko Europe Platform Specialist • Established 1988
UK'S Professional Appliance Spare Part Network • Established 1988
Delivery & Returns Information.
We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.
Stock Availability
Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.
Tradesman Warning
Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.
Understanding Lead Times
Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.
Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.
Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.
Order Transit
Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.
We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.
Heavy/Oversized Items
Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.
Returns Policy
Damages
Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.
Cancellations
You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).
Exclusions
We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.
How to Return an Item
Contact us with your order number and reason for return.
Wait for instructions and the correct returns address (this varies by item).
Package carefully. Do not deface original packaging. Use tracked post.
Have questions about your delivery or a potential return?
Contact Support Team98% of orders delivered on time • Expert Resolution • Established 1988