Cooker Hood Grease Filter
Replacement cooker hood grease filter – compatible with Elica models as shown unless advised otherwise
Description
Restore your Elica cooker hood's extraction performance with this genuine metal grease filter.
As an original Elica component, it matches the factory-fitted filter in dimensions, mesh construction, and frame profile.
The filter mounts on the underside of the hood and traps cooking grease, oil vapour, and food particles before they reach the fan and ducting. Manufactured from layers of expanded aluminium mesh held in a rigid frame, it is designed to withstand the heat and grease of daily cooking while allowing air to pass through freely. You can wash the mesh by hand or in a dishwasher and refit it for repeated use, making it a practical, cost-effective alternative to disposable paper filters.
Grease filters commonly fail due to clogging, corrosion, or physical damage. When the mesh becomes saturated with grease that cannot be washed out, airflow through the hood is restricted, the motor has to work harder, and extraction performance drops, which can lead to overheating. Physical damage such as bent frames, torn mesh, or missing retaining clips prevents the filter from seating correctly, allowing grease to bypass it and reach the motor. Replacing a failed filter is the most effective way to restore extraction performance and protect the hood's internal components.
This grease filter will only fit the models as shown or as specifically advised and will not fit any others, even if it looks the same. It probably won't fit, as there are several that look alike yet are not. Please take time to ensure this is correct before ordering. If you are unsure, please don't hesitate to contact us and ask for assistance.
Technical Notes
Specifications: Genuine Elica metal grease filter. Material: multi-layer expanded aluminium mesh in a rigid metal frame. Finish: natural aluminium with metallic edge trim. Product code: not shown in the URL.
Safety note: Always isolate the appliance from the electrical supply before beginning any work. Allow the hood to cool and the grease to solidify before handling the old filter, as hot grease can cause burns. Wear gloves when removing the filter, as edges may be sharp and the old filter may be heavily soiled. Wash the new filter before first use to remove any manufacturing residue.
Fitment guidance: This metal grease filter fits only the Elica cooker hood models listed in the compatibility matrix below. Model numbers can be found on a rating plate on the underside of the hood or on the inner edge of the chimney section.
ELICA COOKER HOOD
ERA C BL/A/52 (208355407198), VIERA C BL/A/52 (208355407053), LEI B BL/A/52 (208355407469), ERA S BL/A/52 (208355407563), CT17 C BL/A/52 (208355407813), ERA C BL/A/52 (208355408411)
Get Expert Elica Spare Part Help
Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.
| Further Description |
Common Faults & SymptomsThe following fault codes and symptoms are commonly reported when this part begins to fail. Use this as a diagnostic guide before ordering a replacement — if more than one of these is present, the part is the likely culprit. 1
Reduced Suction or Weak Extraction
The most common symptom of a clogged grease filter. Steam, cooking odours and smoke linger in the kitchen instead of being drawn up into the hood. This happens when the mesh becomes so saturated with grease that air can no longer pass through it freely, forcing the motor to work harder for reduced airflow. A highly clogged filter also increases the risk of fire during high-temperature cooking.
2
Grease Dripping From the Hood
When the filter can no longer hold the grease it traps, oil begins to drip from the underside of the hood onto the hob below. This is both a safety hazard and a sign that the filter mesh has become fully saturated. Washing the filter thoroughly can provide a temporary fix, but if the mesh has lost its structure or the frame is bent, replacement is necessary.
3
Error Code E2 (Elica Hoods with Display) — Overheating
Some Elica models with a digital display may show E2 for an overheating condition. A severely clogged grease filter restricts airflow enough to cause heat build-up around the motor and electronics. Allow the appliance to cool, then check and clean or replace the grease filter before resetting the error.
4
Error Code E8 (Elica Hoods with Display) — Unit Defect
Elica models may show E8 for a defect in the extraction unit. While this code can point to a motor or control fault, a severely clogged grease filter is a common cause of motor overheating. Check and replace the grease filter before assuming the motor itself has failed.
5
Grease Filter Saturation Signal Flashing (Elica Hoods with Indicator)
On Elica hoods fitted with a filter saturation indicator, a flashing LED or an alternating F and G display indicates that the grease filter needs to be washed or replaced. The signal typically activates after approximately 30 hours of operation. If the signal persists after washing the filter and resetting the indicator, the filter mesh has likely degraded and should be replaced.
6
Visible Dirt, Discolouration or Saturation on the Filter
Remove the filter and inspect it in good light. A saturated filter will appear dark, greasy or uniformly discoloured. Aluminium mesh can discolour, become brittle, or corrode over time. A corroded filter loses its structural integrity and its ability to trap grease effectively. Once the mesh has begun to corrode, replacement is the only reliable solution.
7
Increased Noise From the Motor
A restricted filter forces the extraction motor to work harder to pull air through, which can cause the hood to become noticeably louder during operation. A hood that used to run quietly at low speed but now sounds strained or whistles is often suffering from a partially blocked grease filter rather than a failing motor.
8
Filter No Longer Seats Securely
If the filter has warped or the retaining clips have broken, it may sit loose in its housing or fall out when the hood is opened. A filter that does not sit flush allows grease and steam to bypass it, reducing extraction efficiency and allowing residue to build up inside the hood. Check the retaining clips and the filter frame before concluding the filter needs replacement.
9
Persistent Odours in the Kitchen
A saturated grease filter holds onto cooking odours and releases them back into the kitchen even after the hood has been switched off. If cooking smells linger for longer than usual, or if the hood itself has developed a stale, greasy smell, the filter is likely the source. Cleaning may help, but a filter that has absorbed odours for a long period will eventually need to be replaced.
10
Grease Build-Up Inside the Hood Body
If grease is accumulating on the inside of the hood, around the motor housing, or on the ducting, the filter is no longer trapping grease effectively. This is often caused by a filter that has lost its mesh structure or is not seated correctly. Cleaning the interior of the hood without addressing the filter will not prevent the problem from returning.
Fitment GuidanceThis metal grease filter is compatible only with the Elica cooker hood models listed in the compatibility matrix above. Even if a filter looks visually similar, the dimensions and the position of the retaining clips can differ between models, so a part that appears to fit may not seat correctly or may allow grease to bypass it.
Diagnostic TipsBefore concluding that the filter needs replacing, carry out these checks to rule out other causes. Most require only a visual inspection.
Installation GuideThese steps describe the general procedure for replacing a cooker hood metal grease filter. The exact sequence varies between models, so always consult the appliance manual where available.
Before Ordering, Check These First
Disclaimer: The fault codes and symptoms listed above are intended as a general guide to assist with diagnosis. They cannot be taken as a definitive diagnosis of any particular problem, and other components may produce similar symptoms. Always confirm the fault with proper testing before ordering parts. |
|---|---|
| Alternate Part Number | X539808 |
| EAN Number | ACC0000299 |
| Manufacturer | Elica Spare Parts |
| Genuine Part | Yes |
Cooker Hood Filter Specialist
Cooker Hood
Filters
Cooker hood filters come in two main types: grease filters, which prevent grease entering the motor, and carbon/charcoal filters, which remove odours and protect the motor. All hoods require a grease filter, and non-vented hoods should also have a carbon filter fitted. Regular replacement or cleaning is essential for optimal performance.
Filter Replacement Guidelines
- Grease filters: replace every 1–6 months depending on cooking frequency and type
- Carbon/charcoal filters: replace every 3–6 months for optimal odour removal
- Metal mesh grease filters: clean regularly to prevent blockage or damage
- Replacement frequency depends on cooking habits rather than just manufacturer guidelines
Some cooker hood filters are highly model-specific. Images and sizes are for illustration only. Always check compatibility with your specific model to ensure correct fit and performance.
Important: Do not rely solely on images, as filters can appear identical but be incompatible. Always refer to model specifications and contact us if unsure.
Can't Find The Cooker Hood Filter You Need?
Finding the right cooker hood filter can be tricky due to model numbers, serial numbers, and specific filter types. We aim to make it simple, but sometimes a little expert help is needed.
Contact us using our page or email, so we can check compatibility, identify low-cost alternatives, and ensure you receive the correct filter quickly, saving you time, hassle, and money.
UK'S Professional Appliance Spare Part Network • Established 1988
Delivery & Returns Information.
We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.
Stock Availability
Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.
Tradesman Warning
Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.
Understanding Lead Times
Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.
Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.
Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.
Order Transit
Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.
We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.
Heavy/Oversized Items
Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.
Returns Policy
Damages
Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.
Cancellations
You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).
Exclusions
We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.
How to Return an Item
Contact us with your order number and reason for return.
Wait for instructions and the correct returns address (this varies by item).
Package carefully. Do not deface original packaging. Use tracked post.
Have questions about your delivery or a potential return?
Contact Support Team98% of orders delivered on time • Expert Resolution • Established 1988