Fan Oven Heating Element

£39.95
SKU
900939
Genuine Part
Typically with you in 4 to 15 days
Commonly used on these brands
Genuine Hisense Spare Part

Replacement fan oven heating element – compatible with Hisense ovens as shown unless advised otherwise

Check your oven model number to ensure a guaranteed fit.

 

Description

Restore even, reliable heat to your Hisense oven with this genuine fan oven heating element.

Manufactured to the original specification, it is identical to the component fitted at the factory and delivers the consistent, circulating heat that fan-assisted cooking depends on. When a fan oven element fails, the oven blows cold air even though the fan and light still work, making this genuine replacement the direct solution.

This circular ring element surrounds the oven fan and fits a broad range of Hisense oven models. Correct wattage and physical fitment are essential for safe operation, and this part matches the original specifications for the listed models.

This element is only known to fit the models shown or as advised and will not fit any others because, even if it looks the same, it probably won't. There will often be several that look alike yet are not; please take time to ensure this is correct before ordering. If you are unsure please don't hesitate to contact us and ask for assistance.

Technical Notes

Specifications: Genuine Hisense fan oven ring heating element. Product code: 900939. Power: 2100 W. Approximate weight: 324 g. Approximate dimensions and weights are for guidance only and must not be used to identify the part. Confirm fitment by appliance model number or by contacting the parts team with your full model and serial number.

Safety note: This is a mains-voltage component. Isolate the oven from the power supply at the consumer unit before commencing work, and allow the appliance to cool fully. A competent person should carry out the fitting.

 

HISENSE OVEN

BOS737E301B-M, BOS737E30XG, BOS737E10BG, BOS737E20BG, BS737EX, BSA5221ABUK, BOPE758B, BC737E20X, BCP637E28BG, BU5223PX, BOP747A23XG, BO737E114XG, VTPS547BX, VTS537BX, VT535AX, EC6353WA, ECS6251CLB, ECS6350XC, EC6353XA, ECS6250CLI, EC8647B, EC8647WN, ECS6250CLB, ECS6350WC, ECS6251CLI, ECS6350WPA, ECS6350XPA, EC8647BN, EIT8648B, EIT8648WN, EIT8648BN, EIT6356XPD, EIT8648X, EIT9648W, EIT8648W, EIT6455WP, EIT6355XPD, EC6451WPB, ECS7615W, EC635PG, EC8647W, CC96264S, EC6352XPA, C818AI, C818AW, KS6350WF, KS6350WA, KS6250CLI, KS635W, KS635X, KS6350XA, K6351WF, K6352WA, K6352XA, KC6355WT, K6351XF, K6151WH, KC6355XT, KEC6151WPG, K6351XC, K868AW6, KEC6352IPC, MEKIS610I, OPS6307B, DK63-B700, DK71-B500, EVP7P41-441E, FR6A4E-AEAA2, EVP341-441M, FR6A4E-CEG42, FI6A4E-GPB42, FI6A4E-GPH42, FR6A4C-BEAA2, FR6A4E-AEG42, FM6A4E-FPGDB, FR6A4F-BEA42, FM6A4E-FPA4B, FI6A4A-GPB42, FM6A4E-APA43, FI6A4F-GPB42, FR6A4E-BEA42, EVP7P41-421I, FM6A4C-APA4B, FR6A4E-AECA2, FR6A4E-AEH42, FM6A4E-JPA4B, FM6A4E-JPGDB, FI6A4F-GTH42, FI6A4F-GTB42, EVP341-441M, FM6A4E-IPA4B, RM6A4E-APG4B, FR6A4F-BEB42, FR6A4A-CEA42, FM6A4E-APAAB, FR6A4E-GEBA2, FR6A4A-CEH42, FM6A4E-APG4B, FM6A4A-HPADH, FK6A4E-T3GDE, FR6A4A-GSAA2, FK6A4E-C1GDE, FR6A4E-CEAA2

 

Get Expert Hisense Spare Part Help

Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.

More Information
Further Description

Common Faults & Symptoms

The following symptoms and fault codes are commonly reported when a fan oven heating element begins to fail. Use this as a diagnostic guide before ordering a replacement.

1
Oven Blows Cold Air on Fan Setting
The fan runs and the light comes on, but no heat is produced. This is the classic sign of a failed fan oven element and is the most common symptom reported.
2
Oven Trips the Consumer Unit
The electricity trips when the fan oven function is selected. A element that has failed internally can cause a short circuit, tripping the RCD or MCB.
3
Uneven Cooking or Cold Spots
Food cooks unevenly across shelves. A partially failed element may still produce some heat but not enough for even circulation throughout the cavity.
4
Visible Damage to the Element
Cracks, blisters, or breaks are visible on the element ring. Physical damage to the element sheath is a clear indication that replacement is required.
5
Error Code E02 Displayed
Hisense ovens may display E02, indicating a heating element malfunction where the element does not reach the expected temperature. This points to the fan or bake element depending on the model.
6
Oven Takes Much Longer to Preheat
The oven eventually reaches temperature but takes far longer than normal. A failing element may still produce some heat, but at reduced output.
7
Fan Oven Function Does Not Work
Other oven functions such as grill or conventional heat work normally, but the fan oven setting produces no heat. This isolates the fault to the circular fan element.
8
Burning Smell During Use
A burning or metallic smell is noticeable when the oven is switched on. A failing element or accumulated residue on the element can produce odours during heating.

Fitment Guidance

This element is compatible only with the Hisense models listed in the compatibility matrix above. Fan oven elements vary in wattage and physical mounting, and an incorrect element can be unsafe.

  • Confirm your full model number matches one of the Hisense codes listed before ordering.
  • The model number is typically found on the rating plate around the oven door opening.
  • This is a 2100 W circular fan oven element; the wattage of the original element is usually stamped on the fixing plate.
  • If your model is not listed, contact the parts team with your serial number before purchasing.

Diagnostic Tips

Before concluding that the element has failed, carry out these checks to confirm the diagnosis.

  • Continuity test: With the oven isolated and the element disconnected, use a multimeter to test for continuity across the element terminals. No continuity confirms the element has failed.
  • Visual inspection: Look for cracks, blisters or breaks in the element sheath. Some failures are visible without testing.
  • Isolate the function: Confirm that other oven functions (grill, conventional) work normally. If only the fan oven setting fails, the circular element is the likely cause.
  • Check the fan: Confirm the fan motor spins freely. If the fan does not run, the fault may lie with the fan motor rather than the element.

Installation Guide

These steps describe the general procedure for a fan oven element. Access varies between models, so consult the appliance manual where available.

  1. Isolate the oven from the power supply at the consumer unit and allow it to cool completely.
  2. Remove the oven from its housing if necessary, or access the rear panel according to your model's design.
  3. Remove the rear panel or fan cover to expose the element and its connections.
  4. Note the position of the wiring, then disconnect the electrical connectors from the element terminals.
  5. Remove the fixing screws or nuts securing the element and carefully withdraw the old element.
  6. Position the new element in place and secure it with the fixings.
  7. Reconnect the electrical terminals in the correct positions.
  8. Refit the rear panel or fan cover and restore the power supply.
  9. Test the oven on the fan setting to confirm the element heats correctly.

Before Ordering, Check These First

  • Confirm your model number matches one of the Hisense codes listed.
  • Verify the fault is with the fan oven element and not the fan motor or control board.
  • Check that the wattage of the original element matches 2100 W where visible.
  • Note that this is a mains-voltage component requiring isolation before fitting.
  • Contact the parts team with your serial number if you are unsure about compatibility.

Disclaimer: The fault codes and symptoms listed above are intended as a general guide to assist with diagnosis. They cannot be taken as a definitive diagnosis of any particular problem, and other components may produce similar symptoms. Always confirm the fault with proper testing before ordering parts.

Alternate Part Number HSN900939, X212623, 824959
EAN Number 3838782743924
Manufacturer Hisense Spares
Genuine Part Yes

Fan Oven Heating Elements Oven & Cooker Spares

Fan Oven
Heating Elements

Fan oven heating elements are the most common cause of an oven failing to heat while the fan and lamp continue to work. They are usually open circuit and require replacement. Most can be replaced from the front of the oven, but a few models need removal from their housing.

The fan oven element (also known as a convection heating element) is the component responsible for heating the air that is then circulated around the oven cavity by the fan. This ensures even heat distribution and consistent cooking results. Over time, the internal filament within the element can burn out or short circuit, leading to a complete loss of heating or intermittent performance.

Signs You Need to Replace Your Fan Oven Element

A faulty fan oven heating element can manifest in several ways. If you're experiencing any of the following issues, this ELE9778 replacement element may be the solution:

  • Oven not heating at all — The most common symptom; the element has likely burned out

  • Oven blowing cold air — The fan runs but no heat is generated

  • Longer preheat times — The oven takes significantly longer than usual to reach temperature

  • Uneven cooking — Food is cooking inconsistently, with some areas undercooked and others burnt

  • Element visibly damaged — Cracks, blistering, or breakage visible on the element surface

  • Oven trips the mains — A shorted element can cause the circuit breaker to trip

Quality & Compatibility

Beware of cheap fan elements sold on auction sites and other sources—they are often poorly made with earthing failures and inferior insulation. We focus on superior quality alternatives, original or better, and avoid selling low-quality components.

Minor changes between element batches may occur, such as removal of the earth tag or differences in mounting. Both are usually easy to accommodate with a little ingenuity.

  • Removal of the earth tag—element still safely earthed to chassis
  • Changes in mounting method—usually accommodated with screws or bolts

Most elements are easy to fit, and we link genuine heating elements to compatible alternatives that we and technicians would recommend. Cheap and poor-quality elements are not sold.

Care & Maintenance

To maximise the lifespan of your new fan oven heating element:

  • Keep the oven clean — built-up grease and food residue can cause hotspots and premature element failure

  • Don't use abrasive cleaners on the element surface

  • Check the element periodically for signs of damage or wear

  • Ensure the oven fan is working — the element relies on the fan to distribute heat evenly; a faulty fan can cause the element to overheat

Can't Find The Fan Oven Element You Need?

If you’re unsure about compatibility or need help confirming a replacement fan oven heating element, contact us. Provide the model number and as much appliance information as possible. We will check for the correct part and suggest low-cost compatible options where available, saving you time, hassle, and money.

Contact Support Team
 hisense Specialists

Hisense
Spare Parts.

As the parent company of Fisher & Paykel, Gorenje, and Kenwood, Hisense is a global leader in appliance manufacturing. This massive scale allows for high-quality components at budget-friendly pricing, provided the parts are identified correctly via technical data.

Finding Hisense Spares

Hisense parts look deceptively similar across different models. To guarantee fitment, we require the precise Model Number from the rating plate.

Rating Plate
ART / Model No.
Technical Lookup
Verified Match

Never rely on user handbooks. They cover entire ranges and are often technically generic.

 

Email Advantage

Finding Hisense parts is a precise task that isn't suitable for phone calls. Via email, our specialists can provide parts blowouts, exploded diagrams, and verified images to ensure your repair is successful.

Verification is the only way to ensure 100% the part you receive is correct.

 

Lookup Guidance

Once you have the model data, we can cross-reference it within the Hisense/Gorenje global network to find the best value component.

Detailed Guide: How to find Hisense Data →

Hisense Parts Sourcing

If you can't find what you need, don't guess. Send us a message and our technical team will identify the correct part for you.

Contact Specialist Team

hisense Expert • Human-Led Verification • Established 1988

NWAR SUPPORT

Spare Parts Help

Identifying technical spares can be a minefield. Our specialist help desk is available via email to cross-reference your model and identify the most cost-effective genuine or alternative options.

Avg. Response Under 60 Minutes
Service Type Expert Verification
Ask A Specialist

Or use the live chat widget below.

UK'S Professional Appliance Spare Part Network • Established 1988

Logistics & Support

Delivery & Returns Information.

We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.

Stock Availability

Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.

Tradesman Warning

Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.

Understanding Lead Times

1 to ** Days

Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.

3 to ** Days

Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.

* to ** Days

Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.

Order Transit

Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.

We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.

Heavy/Oversized Items

Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.

Returns Policy

Damages

Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.

Cancellations

You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).

Exclusions

We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.

How to Return an Item

1

Contact us with your order number and reason for return.

2

Wait for instructions and the correct returns address (this varies by item).

3

Package carefully. Do not deface original packaging. Use tracked post.

Have questions about your delivery or a potential return?

Contact Support Team

98% of orders delivered on time • Expert Resolution • Established 1988

 

Over 1.5 Million Parts in Stock

Ready for quick dispatch and delivery. Our advisors can also help you identify spare parts faster, saving you time.

 
 
Fast Free Advice Mon-Fri, 9am - 5pm
Contact Our Parts Specialists
© NWAR. All rights reserved. Manufacturer logos, images and documentation for informational purposes only.