Cooker Hob Support Buffer Kit (Pack of 12)
Genuine hob pan support buffer kit – identical to the original factory-fitted buffers for Zanussi, Electrolux, REX-Electrolux and IKEA cookers & hobs as shown unless advised otherwise
Description
This is a genuine hob pan support buffer kit, supplied with the same small rubber feet fitted at the factory, which press into the locating holes on the underside of the pan support grids and keep them clear of the hob surface.
The buffers do a small but important job: they cushion the pan support's weight, stop the metal grid from grinding against the glass or stainless steel hob when you lift it on and off for cleaning, and help keep the stand level over the burners.
Once the original feet have perished, hardened or gone missing, the pan support starts to mark the hob surface and no longer sits flat. Fitting the genuine replacement restores both the protection and the stability the appliance was designed with.
This buffer kit includes 12 rubber feet, enough to re-buffer the pan support grids on the models listed and keep a few spare for future use. The buffers are a consumable item—repeated exposure to hob heat gradually hardens and shrinks the rubber, and replacing them regularly is the easiest way to prevent permanent marking on the hob surface.
This buffer kit will only fit the models as shown or as specifically advised and will not fit any others, even if it looks the same; it probably won't be, as there are several that look alike yet are not. If you are unsure please don't hesitate to contact us and ask for assistance.
Technical Notes
Specifications: Genuine hob pan support buffer kit. Product code: 50252326009. Type: replacement rubber buffer feet for hob pan support grids. Quantity: pack of 12. Weight: approximately 82 g. Material: heat-resistant rubber. Finish: black. Purpose: cushions the pan support grids and prevents them from scratching the hob surface. Mounting: push-fit into the locating points on the underside of the pan support.
ELECTROLUX COOKER & HOB
EHG676K, EHG677K, EHM60235X
IKEA COOKER & HOB
LHGA4KX 70156007, LHGA4K 501 560 08, LHGA4K 30156009
REX-ELECTROLUX COOKER & HOB
PRL64RV, PNL64RV, PXL64RV, PBAL64RV
ZANUSSI COOKER & HOB
Z40RI, Z40RC, ZGLR646M, ZGLR646C, PI44GC/2, ZGL62ITX, ZGL62IX, ZGL62IB, ZGS64IX, ZGL62ITW, ZGL62IW, ZGL646ITNC, ZGL646ITC, ZOU348FW, ZOU348FX, ZOU368FX, ZOU359FX, ZOU349FX, ZOU379FX, ZHM835X, ZOU349FTX, ZOU379FTX
Get Expert Cooker & Hob Spare Part Help
Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.
| Further Description |
Common Faults & SymptomsThe following symptoms are commonly reported when a set of hob pan support buffers reaches the end of its serviceable life. Use this as a diagnostic guide before ordering a replacement — if more than one of these is present, the buffers are the likely culprit. 1
SCRATCHES APPEARING ON THE HOB SURFACE
The clearest sign that the buffers have failed. Once the rubber feet have worn away or dropped out, the metal pan support sits directly on the glass or stainless steel surface and scores it every time it is lifted for cleaning. The scratches are permanent and cannot be polished out, so the buffers should be replaced as soon as they are missing or worn.
2
PAN SUPPORT ROCKS OR WILL NOT SIT FLAT
Missing or unevenly worn buffers change the height at which the pan support sits on the hob. With one corner lower than the others, the stand rocks when a pan is placed on it and no longer locates properly over the burners, which affects both stability and flame distribution.
3
RUBBER BUFFERS HAVE PERISHED OR DROPPED OUT
Repeated exposure to the heat of the hob slowly hardens and shrinks the rubber feet until they no longer grip the locating holes in the pan support. In some cases they simply fall out during cleaning and are lost. A full replacement set of 12 is the only reliable way to restore the buffers across the whole stand.
4
PAN SUPPORT SLIDES EASILY WHEN A PAN IS MOVED
One of the buffers' jobs is to grip the hob surface lightly and stop the pan support moving as pans are slid on and off it. When the buffers are missing or worn smooth, the stand shifts position during cooking, which is inconvenient and can also expose the hob to further scratching.
5
A RING OF SCRATCHES AROUND EACH BURNER
A particularly distinctive pattern of fine circular scratches around the burners is almost always caused by the pan support resting directly on the hob. It points to the buffers having failed across the whole stand and indicates that replacement is overdue.
6
NOISE WHEN THE PAN SUPPORT IS MOVED
A scraping or grinding noise when the pan support is lifted on and off for cleaning is the sound of metal on the hob surface. It is a clear sign that the buffers are no longer in contact with the hob, and each time the stand is moved, more of the surface is damaged.
7
PAN SUPPORT IS DIFFICULT TO CLEAN OR MARKED AT THE FEET
A perished buffer leaves behind a sticky residue on the underside of the stand, which then picks up debris and becomes hard to clean. In some cases the rubber breaks down into a black smear that transfers to cloths and hob surfaces when the stand is handled.
8
BURNER FLAME PATTERN LOOKS UNEVEN
If the pan support does not sit at the correct height above the burner, the flame can be deflected away from the base of the pan or made to burn unevenly around the ring. This is usually the combined result of missing buffers and a stand that is no longer level on the hob.
Fitment GuidanceThis part is compatible only with the models listed in the compatibility matrix above. Even if a part looks visually identical, internal specifications can differ.
Diagnostic TipsBefore concluding that the part has failed, carry out these checks to rule out other causes.
Installation GuideThese steps describe the general procedure. The exact sequence varies between models, so always consult the appliance service manual where available.
Before Ordering, Check These First
Disclaimer: The fault codes and symptoms listed above are intended as a general guide to assist with diagnosis. They cannot be taken as a definitive diagnosis of any particular problem, and other components may produce similar symptoms. Always confirm the fault with proper testing before ordering parts. |
|---|---|
| Alternate Part Number | OEM50252326009, 5031685297732, 3556069015, 50268330003 |
| EAN Number | 7321427302281 |
| Manufacturer | Genuine Lux2ELE |
| Genuine Part | Yes |
Oven & Cooker Spare Parts.
Locating your correct model number is the essential first step. Avoid generic user manuals—they often cover multiple chassis types and internal variations that don't apply to your specific unit.
Ovens & Cookers
The rating plate is usually inside the oven door or on the lip of the door opening. For range cookers, check inside the storage drawer or the lower kick-plate.
Built-in Hobs
Hobs present a challenge: the data is typically on the underside. You may need to remove a drawer or look up from inside the cupboard below to view the sticker.
Intelligent Part Filtering
We only list parts with a proven failure rate or those specifically requested by engineers. This limits irrelevant results and ensures you find only what fails, rather than parts that are almost never required.
! Images & Sizes for Information Only
Oven elements and thermostats may vary in shape, terminal position, or wattage from the images shown. Manufacturers frequently alter specifications mid-production.
IMPORTANT: Many heating elements look nearly identical but have different mounting points. Do not rely on visual matching—verify via your model data or ask our specialists.
Right Part, First Time.
Ordering the wrong cooker part is a hassle and an unnecessary expense. We want to help you avoid the frustration of incorrect fitment.
Email allows us to exchange technical diagrams and exploded drawings. This is the fastest way to confirm your repair and find the cheapest compatible options available.
Unsure about a part?
Don't be hasty. One wrong digit leads to the wrong part.
Verify With An ExpertExpert Component Sourcing • Technical Sourcing • Established 1988
Electrolux
Spare Parts.
Electrolux is a global appliance manufacturer with numerous brands, some of which are exclusive to specific regions. Identifying the correct spare part can be complex due to multiple appliance variants — sometimes over thirty per type. In most cases, the Product or PNC number on the rating plate is essential.
Identification & Cross-Reference
Many Electrolux spare parts are shared across the group or used on other brands when generic alternatives are unavailable. Correct identification ensures the replacement fits perfectly and avoids ordering errors.
Group Brands & Fitment
Electrolux parts are often compatible across the group. Common brands include:
- AEG
- Electrolux
- Zanussi
- Parkinson Cowan
- Tricity Bendix
- John Lewis (most models)
- Ikea (most models from 2014 onwards)
Verify Your Electrolux Spare Parts
Provide the Product or PNC number from your appliance’s rating plate and our technical team will confirm the correct Electrolux spare parts for your specific model.
Contact Support TeamGlobal Appliance Manufacturer • Verified Fitment • Established 1988
UK'S Professional Appliance Spare Part Network • Established 1988
Delivery & Returns Information.
We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.
Stock Availability
Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.
Tradesman Warning
Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.
Understanding Lead Times
Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.
Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.
Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.
Order Transit
Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.
We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.
Heavy/Oversized Items
Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.
Returns Policy
Damages
Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.
Cancellations
You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).
Exclusions
We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.
How to Return an Item
Contact us with your order number and reason for return.
Wait for instructions and the correct returns address (this varies by item).
Package carefully. Do not deface original packaging. Use tracked post.
Have questions about your delivery or a potential return?
Contact Support Team98% of orders delivered on time • Expert Resolution • Established 1988