Fridge Bottle Shelf
Replacement fridge door bottle shelf / bottle bar compatible with Beko, Lec & Stoves as shown unless advised otherwise
Description
This genuine fridge door bottle shelf replaces the lower door tray on compatible Beko, Lec and Stoves fridge-freezers. The shelf slots into the door moulding and provides a secure, dedicated storage space for bottles, milk cartons, juice containers and other tall items, helping to keep your fridge organised and your essentials easily accessible.
Over time, plastic door shelves can become brittle, cracked or broken due to the weight of heavy bottles or accidental impact. A damaged shelf can cause bottles to fall, spills inside the fridge, and loss of valuable door storage space.
Replacing a cracked or broken shelf restores full door storage capacity and keeps your items safe and organised.
Technical Notes
Specifications: Approximate dimensions: 435mm (width) x 90mm (depth) x 100mm (height); Weight: approx. 300–500g; Material: Clear plastic; Position: Lower shelf on the refrigerator door; Genuine Beko OEM part.
Fitment guidance: This bottle shelf will only fit the Beko, Lec and Stoves models listed below. It will not fit other models, even if they appear similar, as there are several visually identical shelves that are not interchangeable. The model number and, in some cases, the serial or service number, can usually be found on a rating plate on the inner wall of the fridge compartment, behind the salad drawers, or on the rear of the appliance.
Diagnostic tip: Before replacing the shelf, check that the existing shelf is not simply loose or incorrectly seated. Door shelves slot into moulded grooves in the door panel – if the shelf is sitting at an angle or feels unstable, it may just need reseating. If the shelf is cracked, has broken retaining tabs, or the plastic has become brittle, replacement is the correct solution. Avoid overloading the shelf with excessive weight, as this is the most common cause of breakage.
Replacement tips: No tools are required for this repair. Open the fridge door and locate the shelf. Gently lift the shelf upwards to release it from the door moulding, then pull it forward and out. Clean the door groove before fitting the new shelf to remove any debris or sticky residue. Align the new shelf with the grooves in the door panel and push it down firmly until it seats securely. Check that the shelf sits level and does not wobble before loading it with bottles or containers.
BEKO FRIDGE FREEZER
DSE 25016, 25006, CXS5104W, LX5095W LX5095S, LX465W, LX465S, CXF825W, CXF5104W, CXF825B, CXF5104B, CXF5104S, CXF525W, CXF5083W
LEC FRIDGE FREEZER
INT5050FF
STOVES FRIDGE FREEZER
ST5053FF, SFF5050FF, SFF5050
Get Expert Fridge Freezer Spare Part Help
Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.
| Alternate Part Number | 5045178773504, 5045178536208, BEKBE4807090300, BEK4807090300 |
|---|---|
| Manufacturer | BEK |
| Genuine Part | Yes |
Fridge Door
Shelves & Storage Trays
Fridge door shelves and storage trays, sometimes called milk or bottle bars, are part of the internal “door furniture.” They slot into the door moulding and are model-specific, making the correct make and model vital when ordering replacements.
Over time, plastic bottle shelves can become brittle and crack, particularly under the weight of heavy glass bottles or through accidental impact. A damaged shelf not only looks unsightly but can also be unstable, risking spillages and broken bottles. Replacing a faulty shelf restores both functionality and appearance.
Choosing The Correct Door Shelf or Tray
These trays are rarely universal and cannot be copied, as they are moulded to suit a specific door panel, colour, and style. Even parts that appear similar across a brand range may not fit correctly. Using the model and sometimes serial or service number is essential to get the correct part.
They simply slot into place, but attempting to fit an incorrect shelf can result in poor stability or unusable storage space. Correct identification is key to avoiding mistakes.
Common Causes of Damage:
-
Overloading with heavy bottles
-
Accidental impact from door closing
-
Age-related plastic fatigue and brittleness
-
Temperature fluctuations causing stress cracks
Care & Maintenance
To maximise the lifespan of your new fridge bottle shelf:
-
Clean regularly using warm soapy water and a soft cloth
-
Avoid abrasive cleaners or scouring pads, which can scratch the plastic
-
Do not use in a dishwasher — hand wash only
-
Avoid overloading — distribute weight evenly across the shelf
-
Check the clips periodically for signs of wear or damage
-
Wipe up spills promptly to prevent staining or residue build-up
Can't Find The Fridge Shelf or Tray You Need?
Fridge door shelves and storage trays vary significantly by model and production batch. Visual identification alone is rarely enough — using your fridge's model number is critical to avoid ordering the wrong shelf.
If your model isn't listed above or you're unsure about compatibility, contact our spare parts team with your appliance make, model, and serial number (or a photo of the plate), and we'll confirm the correct replacement for you
Contact Support TeamBeko
Spare Parts.
Beko produces appliances across multiple variants, and identification of the correct spare parts often requires the model number and, in some cases, the product code or serial number. Many parts are shared across brands owned or produced by Beko, including Hotpoint, Whirlpool, Blomberg, Grundig, and Flavel.
Correct Model Identification Is Essential
To find the correct Beko spare parts, you will need at least the model number. Some appliances also require the product code or serial number for precise identification. The rating plate contains this key information, including the manufacturing date.
Variant & Modification Awareness
Some Beko spare parts have been modified over time, so the replacement part may differ visually from the original. Careful identification using the model, product code, and serial number is essential to ensure the correct fit.
Confirm Your Beko Spare Parts
Provide the model number, product code, and/or serial number or a photo of the rating plate from your appliance, and our technical team will confirm the correct Beko spare parts for your appliance quickly and accurately.
Contact Support TeamTurkish Manufacturer • Multi-Brand Parts • Verified Fitment • Established 1988
UK'S Professional Appliance Spare Part Network • Established 1988
Delivery & Returns Information.
We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.
Stock Availability
Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.
Tradesman Warning
Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.
Understanding Lead Times
Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.
Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.
Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.
Order Transit
Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.
We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.
Heavy/Oversized Items
Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.
Returns Policy
Damages
Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.
Cancellations
You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).
Exclusions
We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.
How to Return an Item
Contact us with your order number and reason for return.
Wait for instructions and the correct returns address (this varies by item).
Package carefully. Do not deface original packaging. Use tracked post.
Have questions about your delivery or a potential return?
Contact Support Team98% of orders delivered on time • Expert Resolution • Established 1988