Freezer Drawer Front
Replacement freezer drawer front – compatible with Beko, Indesit and Whirlpool as shown unless advised otherwise
Description
This genuine freezer drawer front is identical to the original panel fitted at the factory, giving a precise replacement for a cracked, scratched or missing drawer front on Beko, Indesit and Whirlpool fridge freezers. It restores the finished appearance of the freezer interior and gives a solid surface to pull the drawer open, with the same moulding, colour and finish as the part it replaces.
Drawer fronts are matched to the drawer body and the cabinet layout of a particular model, so a front panel that looks similar from a different range is unlikely to clip on correctly. The compatibility matrix below shows the specific model numbers covered by this listing.
This freezer drawer front will only fit the models shown or as specifically advised and will not fit any others, even if it looks the same; it probably won't be, as there are several that look alike yet are not. Please take time to ensure this is correct before ordering. If you are unsure, please don't hesitate to contact us and ask for assistance.
Technical Notes
Specifications: Product code: 4638960200. Material: moulded plastic with cold-resistant finish. The manufacturer does not publish dimensions or weight for this drawer front. Approximate dimensions and weights are for guidance only and must not be used to identify the part. Fitment is confirmed by model number or by contacting the parts team with the full model and serial number.
BEKO FRIDGE FREEZER
CN134230, CN134230DX, CN134230DXP, CN134230DXW, CSA24020, CSA24020B, CSA24022, CSA28020, RCSA270K20W, RCSA270K20X, RCSA270K30X, RCSA300K20W
INDESIT FRIDGE FREEZER
BIAA 13, BIAA 14, BIA 13, TIAA 10, TIAA 12, TIAA 13, TIAA 14, IB55732S
WHIRLPOOL FRIDGE FREEZER
TBC – Please check your model number with our team to confirm fitment.
Get Expert Appliance Spare Part Help
Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.
| Further Description |
Common Faults & SymptomsThe following symptoms are commonly reported when this part begins to fail. Use this as a diagnostic guide before ordering a replacement — if more than one of these is present, the part is the likely culprit. 1
Visible Crack Or Chip In The Drawer Front
Plastic becomes brittle at freezer temperatures, so a crack across the front panel will usually spread and can eventually split away from the drawer body.
2
Front Panel Detached From The Drawer Body
If the retaining clips have broken, the front panel will come away from the drawer body when pulled, leaving the drawer hard to open.
3
Drawer Will Not Stay Closed
A distorted or loose front panel can prevent the drawer from sitting flush against the compartment, allowing cold air to escape.
4
Drawer Front Missing
With the front panel missing, the drawer is awkward to pull out and the contents are exposed to the freezer interior.
5
Front Panel Discoloured Or Cloudy
Long-term cold exposure and food staining can leave the plastic cloudy or yellowed, which is often the reason a drawer front is renewed.
6
Drawer Front Rattles Or Works Loose
If the panel is not held firmly by its clips, it can rattle or shift each time the drawer is opened and closed.
7
Ice Building Up Where The Drawer Should Sit
A gap left by a damaged front panel can let warm air reach the compartment, encouraging frost to form on the drawer and nearby surfaces.
8
No Error Code Displayed
A damaged drawer front is a mechanical fault and will not normally trigger a fault code or warning on the appliance display.
Fitment GuidanceThis part is compatible only with the models listed in the compatibility matrix above. Even if a front panel looks visually identical, the width and clip arrangement can differ between drawer positions and ranges.
Diagnostic TipsBefore concluding that the part has failed, carry out these checks to rule out other causes.
Installation GuideThese steps describe the general procedure. The exact sequence varies between models, so always consult the appliance manual where available.
Before Ordering, Check These First
Disclaimer: The fault codes and symptoms listed above are intended as a general guide to assist with diagnosis. They cannot be taken as a definitive diagnosis of any particular problem, and other components may produce similar symptoms. Always confirm the fault with proper testing before ordering parts. |
|---|---|
| Alternate Part Number | 4638960200, BEKC00918495, C00918495, C00860787 |
| EAN Number | 8053190504959 |
| Manufacturer | BEK |
| Genuine Part | Yes |
Freezer
Flaps & Covers
Plastic freezer flaps and drawer fronts are common breakages, especially in cheaper models. Overfreezing, frost buildup, or overloading baskets increases stress on these parts. Regular defrosting and careful use can help prevent damage.
Ordering Freezer Internal Plastic Parts
Do not rely solely on images when ordering flaps or drawer fronts. Each part is uniquely moulded to fit specific positions and models. Matching your model and position is essential for a correct fit.
If you are unsure, contact us—we can verify your model, position, or part dimensions (if available) to ensure you receive the correct replacement and avoid mistakes.
Can't Find The Freezer Flap You Need?
Freezer flaps and drawer covers can vary by model and position. Send us your fridge/freezer model, or a photo of the part, and we’ll help you find the correct replacement. We can also suggest low-cost compatible options when available.
Contact Support TeamBeko
Spare Parts.
Beko produces appliances across multiple variants, and identification of the correct spare parts often requires the model number and, in some cases, the product code or serial number. Many parts are shared across brands owned or produced by Beko, including Hotpoint, Whirlpool, Blomberg, Grundig, and Flavel.
Correct Model Identification Is Essential
To find the correct Beko spare parts, you will need at least the model number. Some appliances also require the product code or serial number for precise identification. The rating plate contains this key information, including the manufacturing date.
Variant & Modification Awareness
Some Beko spare parts have been modified over time, so the replacement part may differ visually from the original. Careful identification using the model, product code, and serial number is essential to ensure the correct fit.
Confirm Your Beko Spare Parts
Provide the model number, product code, and/or serial number or a photo of the rating plate from your appliance, and our technical team will confirm the correct Beko spare parts for your appliance quickly and accurately.
Contact Support TeamTurkish Manufacturer • Multi-Brand Parts • Verified Fitment • Established 1988
UK'S Professional Appliance Spare Part Network • Established 1988
Delivery & Returns Information.
We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.
Stock Availability
Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.
Tradesman Warning
Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.
Understanding Lead Times
Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.
Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.
Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.
Order Transit
Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.
We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.
Heavy/Oversized Items
Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.
Returns Policy
Damages
Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.
Cancellations
You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).
Exclusions
We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.
How to Return an Item
Contact us with your order number and reason for return.
Wait for instructions and the correct returns address (this varies by item).
Package carefully. Do not deface original packaging. Use tracked post.
Have questions about your delivery or a potential return?
Contact Support Team98% of orders delivered on time • Expert Resolution • Established 1988
