Lamona Freezer Flap
Replacement pull up freezer flap – compatible with Lamona as shown unless advised otherwise
Description
This genuine Lamona freezer flap matches the original factory-fitted part, providing a precise replacement for a cracked, warped, or missing flap. It restores the front of the frozen storage basket so contents stay neatly contained, and it is moulded in the same material and colour as the part it replaces.
Lamona uses different flap mouldings for different basket positions and cabinet designs, so the flap that suits one drawer may not suit another. The compatibility list below shows the Lamona freezer models covered by this listing.
This flap is only known to fit the models shown or as advised and will not fit any others, because even if it looks the same, it probably won't. Several items may look alike but not be the same; please take time to confirm this is correct before ordering. If you are unsure, please don't hesitate to contact us and ask for assistance.
Technical Notes
Specifications: Product code: 4312618100. Material: moulded plastic, suitable for low freezer temperatures. The manufacturer does not publish dimensions or weight for this freezer flap. Approximate dimensions (380mm x 152mm x 20mm) and weights are for guidance only and must not be used to identify the part. Confirm fitment by model number or by contacting the parts team with the full model and serial number.
LAMONA FREEZER
LAM6800, HJA6750, LAM6800c Arc, TA52000
Get Expert Lamona Spare Part Help
Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.
| Further Description |
Common Faults & SymptomsThe following symptoms are commonly reported when this part begins to fail. Use this as a diagnostic guide before ordering a replacement — if more than one of these is present, the part is the likely culprit. 1
Flap Has Cracked Along The Edge
The plastic becomes brittle at freezer temperatures, so a hairline crack along the top or bottom edge will usually spread until the flap breaks away.
2
Flap Will Not Stay In Position
If the flap keeps dropping out of its slots or clips, the retaining lugs have broken or worn and it can no longer be held securely.
3
Flap Has Broken Away Completely
Once the moulding has snapped through, the flap cannot be reattached and the basket is left open at the front.
4
Small Items Falling Out Of The Basket
With the front flap missing or loose, loose frozen items can escape the basket and end up scattered across the compartment floor.
5
Basket Catches When Sliding In And Out
A flap that has warped or dropped slightly out of line can catch on the compartment sides, making the basket stiff to move.
6
Frost Forming On Packaging Near The Opening
An open basket front allows more air to circulate around the contents, which can lead to frost and ice crystals forming on packaging.
7
Flap Has Warped Or Bent Out Of Shape
Exposure to warmth during defrosting or a door left open can distort the moulding so that it no longer sits flat against the basket.
8
No Error Code Displayed
A damaged freezer flap is a mechanical fault and will not normally trigger a fault code or warning on the appliance display.
Fitment GuidanceThis part is compatible only with the models listed in the compatibility matrix above. Even if a part looks visually identical, the width, curvature and clip positions can differ between basket positions.
Diagnostic TipsBefore concluding that the part has failed, carry out these checks to rule out other causes.
Installation GuideThese steps describe the general procedure. The exact sequence varies between models, so always consult the appliance manual where available.
Before Ordering, Check These First
Disclaimer: The fault codes and symptoms listed above are intended as a general guide to assist with diagnosis. They cannot be taken as a definitive diagnosis of any particular problem, and other components may produce similar symptoms. Always confirm the fault with proper testing before ordering parts. |
|---|---|
| Alternate Part Number | 4312618100, C00883781, BEKBE4312618100, BEK4312618100 |
| EAN Number | 4312618100 |
| Manufacturer | Lamona |
| Genuine Part | Yes |
Freezer
Flaps & Covers
Plastic freezer flaps and drawer fronts are common breakages, especially in cheaper models. Overfreezing, frost buildup, or overloading baskets increases stress on these parts. Regular defrosting and careful use can help prevent damage.
Ordering Freezer Internal Plastic Parts
Do not rely solely on images when ordering flaps or drawer fronts. Each part is uniquely moulded to fit specific positions and models. Matching your model and position is essential for a correct fit.
If you are unsure, contact us—we can verify your model, position, or part dimensions (if available) to ensure you receive the correct replacement and avoid mistakes.
Can't Find The Freezer Flap You Need?
Freezer flaps and drawer covers can vary by model and position. Send us your fridge/freezer model, or a photo of the part, and we’ll help you find the correct replacement. We can also suggest low-cost compatible options when available.
Contact Support Team
Lamona Parts Specialist
Lamona
Spare Parts.
Lamona is a "private label" brand owned by Howdens Joinery. Because Lamona does not manufacture its own appliances, its products are sourced from various global factories, making expert technical cross-referencing essential for a successful repair.
Parts Lookup Requirement
Lamona appliances come from multiple manufacturers (including Beko and others). To identify the correct part, the Model Number from the rating plate is absolutely mandatory. Visual similarity is deceptive in the Lamona range.
The Price Advantage
Because Lamona parts are rebadged, they are often identical to components used in other major brands. We identify these functional matches to provide you with the same high-quality part for less money, simply by bypassing the Lamona-branded packaging.
Beware of "Similar" Parts
Oven knobs and fridge shelves are common pitfalls. They may look identical in photos but have different spindles, depths, or clipping mechanisms. Our standing advice: don’t guess. Let us take the time to verify the part against your specific model number.
Confirm Your Lamona Spares
Don’t risk ordering the wrong part. Our technical helpdesk can cross-reference your Lamona model against the original factory sources to find the exact component you need at the best price.
Contact Support TeamLamona Technical Expert • Rebadging Platform Specialist • Established 1988
UK'S Professional Appliance Spare Part Network • Established 1988
Delivery & Returns Information.
We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.
Stock Availability
Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.
Tradesman Warning
Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.
Understanding Lead Times
Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.
Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.
Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.
Order Transit
Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.
We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.
Heavy/Oversized Items
Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.
Returns Policy
Damages
Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.
Cancellations
You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).
Exclusions
We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.
How to Return an Item
Contact us with your order number and reason for return.
Wait for instructions and the correct returns address (this varies by item).
Package carefully. Do not deface original packaging. Use tracked post.
Have questions about your delivery or a potential return?
Contact Support Team98% of orders delivered on time • Expert Resolution • Established 1988