Oven Lower Heating Element

£36.95
SKU
17471100001480
Genuine Part
Typically with you in 3 to 12 days
Commonly used on these brands
Genuine Spare Part

Replacement oven lower heating element – compatible with Amica, Blaupunkt, Caple and other brands as shown unless advised otherwise

Check your oven & cooker model number to ensure a guaranteed fit.

 

Description

This genuine lower heating element matches the component fitted at the factory, restoring even, reliable bottom heat for baking, roasting, and base browning.

As a genuine part, it matches the original manufacturer’s specification for wattage, element profile and mounting plate, so it fits the existing oven cavity and heats exactly as the original did. A failed lower element is a common cause of uneven cooking, raw bases and an oven that fails to reach temperature.

The element is a 1100 W, 230 V component measuring 400 mm × 255 mm, with an 8 mm stainless steel tube and a support plate for secure mounting. It has no thermostat or thermal fuse, so it is a direct electrical replacement for the original. It fits a wide range of models from Amica, Blaupunkt, Caple, Comfee, Cooke & Lewis, Logik, Montpellier, Normende, Proline, Russell Hobbs, Statesman, and Valberg.

This oven heating element will only fit the models as shown or as specifically advised and will not fit any others even if it looks the same, it probably won't be as there are several that look alike yet are not. Please take time to ensure this is correct before ordering.

Technical Notes

Specifications: Genuine lower heating element. Power: 1100 W. Voltage: 230 V. Length: 400 mm. Width: 255 mm. Tube diameter: 8 mm. Material: stainless steel. Weight: approx. 667 g. Thermostat: no. Thermal fuse: none. Product code: 17471100001480. Approximate dimensions and weights are for guidance only and must not be used to identify the part; always confirm fitment by model number.

Safety note: This element operates at mains voltage and reaches high temperatures. Isolate the oven from the electrical supply at the consumer unit and allow the appliance to cool completely before fitting. If you are not confident working with appliance electrics, have a competent person install the element.

 

AMICA COOKER & OVEN

AO2004X, AO2007X, AO2008X/1, AO2009X/1

 

BLAUPUNKT COOKER & OVEN

5B30P0250, 5B36N 0250, 5B36N0250, 5B36N0250GB, 5B36P 0250, 5B36P0250, 5B36P0250GB, 5BD 36250, 5BD36250

 

CAPLE COOKER & OVEN

C2472

 

COMFEE COOKER & OVEN

CBO65P90E3-BK, CHK65UE OVEN, CHK65UE-HERD, CHS 8701 DI OVEN, HS 700 BA-HERD

 

COOKE & LEWIS COOKER & OVEN

CLMFSTA, CLMFBI, CLMFBIA, CLMFBLA, CLMFMIA, CLMFST, CLOVST60BK, CLPYBL, CLPYBLA, CLPYST, CLPYSTA, CLPYSTA 70L

 

LOGIK COOKER & OVEN

LBCONX17E

 

MONTPELLIER OVEN & COOKER

SFO74B

 

NORMENDE COOKER & OVEN

TBC – Please check your model number with our team to confirm fitment.

 

PROLINE COOKER & OVEN

65EAE40102, CNC65BK4, CNE 6 SSB/1, CNE 6 X, CNE 6W-1, CNE 6X-1, CNE6SSB, CNE6W, CNE7SSB, CNE7W, CNE7X, CNE8X, ME651SS, ME651SS/1, ME651SS2, MFP6500SSB, MFP6500SSB2, MFP6500SSB3, MFP6500SSB4, P601IMCIBK, P601IMCIXT, P601IMCWHT, P602IMCIBK, P602IMCWH, P603IMCIBK, P60IMCIX, P60IMCIXT, PCC6060, PECNE604WH

 

RUSSELL HOBBS COOKER & OVEN

TBC – Please check your model number with our team to confirm fitment.

 

STATESMAN COOKER & OVEN

BSM60BL, BSM60SS

 

VALBERG COOKER & OVEN

CV604CMWMISC, FM65PX2MSC, FM70PXMISC, IC 60 4MC X 343C, IC603MPW343C, IC603MPX343C, IC604MCW343C, MFO 70 P X 343C, MFO 70PX CD 343C (V2), MFO 70PX CDTR 343C (V2), MFO65HX343C, MFO70 PXCD 343C, VALCI604MCWMISC, VALCI604MCXMISC, VALFM65PN2MSC, VALFM65PNMSC, VALFM65PXMSC, VALFM70PXMSC

 

Get Expert Oven & Cooker Spare Part Help

Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.

More Information
Further Description

Common Faults & Symptoms

The following symptoms are commonly reported when a lower heating element begins to fail. Use this as a diagnostic guide before ordering a replacement — if more than one of these is present, the element is the likely culprit.

1
Oven Does Not Heat from the Base
The most direct symptom of a failed lower element is that the oven remains cold at the bottom while the top heat may still work. Food bases remain pale and undercooked.
2
Uneven Baking and Cooking
Bakes may rise unevenly or have a raw centre because the base heat is missing. Pastries, pizzas and quiches are particularly affected.
3
Visible Blistering or Break in the Element
A failed element often shows a visible blister, crack or complete break in the metal sheath. This is usually obvious once the base panel is removed.
4
Oven Trips the RCD or Circuit Breaker
An element with damaged insulation can cause the earth leakage device or circuit breaker to trip when the oven is switched on, cutting power to the circuit.
5
Oven Takes a Long Time to Reach Temperature
A partially failed element may still produce some heat, but the oven takes far longer to reach the set temperature and cooking times are extended.
6
Burning Smell or Metallic Odour
A burning or metallic smell near the base of the oven can come from a failing element as the internal wire overheats or insulation breaks down. This requires immediate attention.
7
Error Code on Display
Some ovens may display a heating-related error code when the element fails to draw current or the temperature does not rise as expected.

Fitment Guidance

This element is compatible only with the models listed in the compatibility matrix above. Even if an element looks visually similar, the wattage, mounting plate and terminal position can differ between oven ranges.

  • The element is listed for specific models across Amica, Blaupunkt, Caple, Comfee, Cooke & Lewis, Logik, Montpellier, Normende, Proline, Russell Hobbs, Statesman and Valberg.
  • Your full model number, usually found on the rating plate on the oven frame or inside the door, must match one of the listed codes exactly.
  • Do not rely on the external appearance of the old element alone — the wattage and bracket layout can vary between revisions.
  • If your model is not listed, contact the parts team with the model and serial number before ordering.

Diagnostic Tips

Before concluding that the element has failed, carry out these checks to rule out other causes.

  • TEST FOR CONTINUITY: With the power isolated and the element disconnected, a multimeter should show continuity across the element terminals. No reading indicates an open circuit and a failed element.
  • CHECK THE THERMOSTAT: A faulty thermostat or thermal cut-out can prevent the element from being switched on, mimicking an element failure.
  • INSPECT THE WIRING AND RELAY: Confirm that the element is receiving voltage when the oven calls for heat. A failed relay on the control board can leave the element without power.
  • RULE OUT A SELECTOR SWITCH FAULT: Some ovens will not energise the lower element if the function selector switch has failed.

Installation Guide

These steps describe the general procedure. The exact sequence varies between models, so always consult the appliance service manual where available.

  1. Isolate the oven from the mains supply at the consumer unit and allow it to cool completely.
  2. Remove the oven shelves and, if necessary, the base panel or rear cover to access the lower element.
  3. Disconnect the electrical connectors from the old element, noting their positions.
  4. Remove the screws or nuts securing the element and support plate, then withdraw the element from the cavity.
  5. Fit the new element in reverse order, ensuring the support plate sits flat and the terminals are secure.
  6. Restore power and run the oven for a short period to confirm the element heats and the oven reaches temperature.

Before Ordering, Check These First

  • Confirm that the oven is genuinely cold at the base and not simply slow to heat due to a thermostat fault.
  • Inspect the old element for visible blistering, breaks or a burnt smell.
  • Test the element for continuity with a multimeter before ordering.
  • Verify that your model number appears in the compatibility list, character for character.
  • If you are unsure, contact the parts team with your full model and serial number before placing an order.

Disclaimer: The fault codes and symptoms listed above are intended as a general guide to assist with diagnosis. They cannot be taken as a definitive diagnosis of any particular problem, and other components may produce similar symptoms. Always confirm the fault with proper testing before ordering parts.

Alternate Part Number 17471100001474, 17471100000280, 1064418
EAN Number 5056145310752
Manufacturer Midea
Genuine Part Yes

Expert Component Support

Oven Heating Elements.

Cooker and oven lower element failures are usually easy to diagnose because the oven will only partially heat or not heat up as it should.

How to Identify a Faulty Lower Element:

  • Visual inspection — Remove the oven floor panel (if applicable) and inspect the element for visible damage

  • Multimeter test — A continuity test will confirm whether the element has burned out

  • Performance symptoms — If the oven takes ages to heat up or doesn't reach temperature at all, the element is likely faulty

Functionality

You’ll often find that the lower or base oven element is only found in static ovens (not fan-driven) on multi-function ovens. These base elements usually work in conjunction with other heating elements to provide an even spread of heat throughout the cooking cavity.

DIY Installation

Changing many lower base heating elements can be tricky; some are downright awkward! It’s therefore advised only for those with good DIY skills. In almost all cases, built-in models must be removed from the housing and panels removed to access the element.

!

Critical Safety Notice

As always, when working on electrical appliances like ovens and cookers, isolate the appliance from the mains power for safety. Never work in a cooker or oven that’s live, as it’s highly dangerous.

Component Quality

Base elements can be the victim of cheap and poor-quality parts that fail sooner if they work at all, and they can be poorly constructed, making them harder to fit. That being said, there are sometimes good-quality compatible elements available if it’s a common part or if it frequently fails.

Care & Maintenance

To maximise the lifespan of your new lower oven heating element:

  • Keep the oven clean — built-up grease and food residue can cause hotspots and premature element failure

  • Avoid placing items directly on the oven floor — this can damage the element

  • Use oven liners with caution — some liners can trap heat and cause the element to overheat

  • Don't use abrasive cleaners on the element surface

  • Check the element periodically for signs of damage or wear

Can't Find The Heating Element You Need?

Lower oven heating elements vary significantly by model, wattage, dimensions, and fixing points. Visual identification alone is rarely enough — using your oven or cooker model number is critical to avoid ordering the wrong element.

If you're unsure about compatibility, contact our spare parts team with your appliance make, model, and serial number, and we'll verify the correct part for you before you order.

Email Specialist Support

IMAGES AND SIZES ARE FOR ILLUSTRATION ONLY

Parts may vary in shape and size to the images shown as parts are model-specific and subject to change or alteration at any time without notice. This spare part will only fit the models as described in the listing unless specifically advised otherwise by us.

NOTE: Some oven heating elements and related components vary significantly depending on the model. Please take care when ordering and don't rely solely on images as they can look nearly identical!

Technical Component Specialist • Genuine & Verified Alternatives • Established 1988

NWAR SUPPORT

Spare Parts Help

Identifying technical spares can be a minefield. Our specialist help desk is available via email to cross-reference your model and identify the most cost-effective genuine or alternative options.

Avg. Response Under 60 Minutes
Service Type Expert Verification
Ask A Specialist

Or use the live chat widget below.

UK'S Professional Appliance Spare Part Network • Established 1988

Logistics & Support

Delivery & Returns Information.

We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.

Stock Availability

Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.

Tradesman Warning

Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.

Understanding Lead Times

1 to ** Days

Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.

3 to ** Days

Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.

* to ** Days

Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.

Order Transit

Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.

We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.

Heavy/Oversized Items

Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.

Returns Policy

Damages

Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.

Cancellations

You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).

Exclusions

We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.

How to Return an Item

1

Contact us with your order number and reason for return.

2

Wait for instructions and the correct returns address (this varies by item).

3

Package carefully. Do not deface original packaging. Use tracked post.

Have questions about your delivery or a potential return?

Contact Support Team

98% of orders delivered on time • Expert Resolution • Established 1988

 

Over 1.5 Million Parts in Stock

Ready for quick dispatch and delivery. Our advisors can also help you identify spare parts faster, saving you time.

 
 
Fast Free Advice Mon-Fri, 9am - 5pm
Contact Our Parts Specialists
© NWAR. All rights reserved. Manufacturer logos, images and documentation for informational purposes only.