Fridge Salad Drawer

£59.95
SKU
140060247198
Genuine Part
Typically with you in 5 to 20 days
Commonly used on these brands
Genuine John Lewis Spare Part

Replacement fridge salad drawer – compatible with John Lewis models as shown unless advised otherwise

Check your fridge freezer model number to ensure a guaranteed fit.

 

Description

This is a genuine John Lewis fridge salad drawer, identical to the drawer originally fitted at the factory.

It provides a dedicated, ventilated storage compartment for fruit and vegetables, helping to keep produce fresh and organised at the bottom of the fridge. Manufactured to the original specification, it matches the original drawer in moulding, runner profile and front panel fit, so it slides into the existing guides without modification.

Please note that the internal divider is not supplied with this drawer; it is a separate part.

This drawer is only known to fit the John Lewis models shown and will not fit any others, as even similar-looking drawers can differ in runner profile or depth. Please take time to confirm your model number before ordering.

Technical Notes

Specifications: Genuine John Lewis fridge salad drawer, moulded plastic. Product code: 140060247198. The manufacturer does not publish dimensions or weight for this part; fitment is confirmed by the appliance model number. Contact the parts team with the full model and serial number if you need confirmation.

 

Ordered on request only - not returnable.

 

JOHN LEWIS FRIDGE FREEZER

JLBIFF1901, JLBIFF73191

 

Get Expert John Lewis Spare Part Help

Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.

More Information
Further Description

Common Faults & Symptoms

The following symptoms are commonly reported when a fridge salad drawer becomes damaged, worn or incorrectly fitted. Use this as a guide before ordering a replacement — if more than one of these is present, the drawer or its runners are the likely culprit.

1
CRACKED OR SPLIT DRAWER BODY
The plastic drawer develops cracks along the base, corners or front lip, usually after repeated sliding in and out over several years or from being dropped during cleaning. Once split, the drawer cannot safely hold produce and should be replaced.
2
DRAWER STICKS OR WILL NOT SLIDE SMOOTHLY
The drawer judders, jams or requires force to open and close. Common causes are a distorted drawer body, debris in the runners or produce packaging trapped behind the drawer, all of which can lead to further damage if ignored.
3
DRAWER DROPS OUT OF THE RUNNERS
The drawer tips forward or falls out when pulled beyond its normal travel. Worn runner hooks or side mouldings are the usual cause, and a drawer that no longer engages securely should not be used for heavier produce.
4
DRAWER SITS UNEVENLY OR TILTS
The drawer does not sit level in the fridge, either because one side has not engaged with the runner or because the drawer is distorted. An uneven drawer can jam and spill produce when moved.
5
PRODUCE FREEZING OR BRUISING IN THE DRAWER
Fruit and vegetables spoil faster than expected, or items nearest the back of the drawer become partially frozen. A cracked or incorrectly seated drawer can disrupt airflow around the compartment and affect the temperature the produce is exposed to.
6
DRAWER FRONT OR HANDLE BROKEN
The front lip or handle area snaps, making the drawer awkward to pull and leaving sharp plastic edges. A replacement drawer restores safe handling and the correct finished look inside the fridge.
7
CONDENSATION OR WATER POOLING UNDER THE DRAWER
Water collects beneath the salad drawer or around its base. This can be caused by a blocked drain hole in the fridge compartment, but a cracked drawer that no longer sits flush can also allow moisture to escape and pool in the wrong place.
8
DOOR WILL NOT CLOSE PROPERLY
A drawer that is not fully seated or is distorted can protrude slightly and prevent the fridge door from closing flush. This leads to temperature fluctuation, energy waste and further condensation problems.

Fitment Guidance

This salad drawer is compatible only with the John Lewis models listed in the compatibility matrix above. The internal divider is not supplied and is a separate part.

  • Confirm the full model number from the rating plate inside the fridge compartment, not just the series name.
  • This drawer is supplied without the internal divider; the divider must be ordered separately if required.
  • John Lewis fridge freezers can share similar-looking drawers that are not interchangeable, so the model list must be checked carefully.
  • If the model is not listed, contact the parts team with the full model and serial number before ordering.

Diagnostic Tips

Before concluding that the drawer has failed, carry out these checks to rule out other causes.

  • CHECK THE RUNNERS: Inspect the fridge runners and shelf frame for cracks, missing end stops or debris; a damaged runner makes a sound drawer feel loose or stiff.
  • CHECK THE DRAIN HOLE: If water is pooling under the drawer, check the defrost drain hole at the back of the fridge compartment for a blockage before blaming the drawer.
  • CHECK THE DRAWER SEATING: Remove and refit the drawer to confirm it sits flush on both runners and does not protrude at the front.
  • CHECK FOR OBSTRUCTION: Look behind and beneath the drawer for packaging, loose produce or ice stopping it from sliding fully home.

Installation Guide

These steps describe the general procedure for replacing a fridge salad drawer. The exact sequence can vary slightly between models.

  1. Empty the drawer and remove any produce stored around it.
  2. Pull the old drawer forward until it releases from the runners, then lift it clear.
  3. Clear any debris from the runners and check that the guide rails are undamaged.
  4. Align the new drawer with the runner guides at the bottom of the fridge.
  5. Slide the drawer in until it seats fully and moves smoothly without tilting.
  6. Load the drawer lightly and confirm that it stays in position and does not prevent the fridge door from closing.

Before Ordering, Check These First

  • Confirm that the internal divider is not required, as it is not supplied with this drawer and is a separate part.
  • Check the model number against the compatibility list above; do not rely on photographs alone as salad drawers look very similar.
  • Inspect the fridge runners and drain hole for damage or blockages before fitting a new drawer.
  • If the model is not listed, contact the parts team with the full model and serial number before ordering.
  • VERIFY YOUR FULL MODEL NUMBER

Disclaimer: The fault codes and symptoms listed above are intended as a general guide to assist with diagnosis. They cannot be taken as a definitive diagnosis of any particular problem, and other components may produce similar symptoms. Always confirm the fault with proper testing before ordering parts.

Alternate Part Number DST140060247198
EAN Number 140060247198
Manufacturer Genuine Lux2ELE
Genuine Part Yes

Refrigeration Storage Specialist

Salad Bins & Storage Trays.

In the bottom of the refrigerator section, you’ll find ridge salad bins, drawers, or trays. These are typically used for storing vegetables, salads, or other fresh foods.

Composition

Salad trays are usually made from plastic. Over time, these plastic containers can become brittle, crack, and break apart due to holding a fair amount of weight from heavy fresh produce.

Fitment Standard

There are no universal trays or drawers. They are all quite unique in shape and size to a specific model or range. Fridge storage drawers come in a variety of dimensions, often unique to just one or two models.

Technical Lookup Requirements

When buying a new salad storage tray, it’s important to have the correct fridge model number. In some cases, you’ll also need the serial number or relevant production code information.

Where to find your data: This information is usually found on the inner wall of the fridge or fridge freezer, specifically in the area where the salad storage drawers are located.

Can't Find The Salad Tray You Need?

Using a salad drawer for a fridge or fridge freezer can be a pain, as they all have unique shapes to fit. Often, using sizes to find them would be pointless. Thankfully, we’re here to help! Send us your unit details via our contact page or email as a first resort. This allows us to look up spare parts and cross-reference to find any alternatives and the best pricing for you.

Request Tray Identification • Response typically under 1 hour (weekdays)

IMAGES AND SIZES ARE FOR ILLUSTRATION ONLY

Parts may vary in shape and size to the images shown as parts are model-specific and subject to change or alteration at any time without notice. This spare part will only fit the models as described in the listing unless specifically advised otherwise by us.

NOTE: Almost all fridge salad drawers or trays are make AND model specific. They are designed for specific positions and are highly dependent on the cabinet mould design. Please do not rely solely on images as many containers look nearly identical!

Technical Component Specialist • Genuine & Verified Alternatives • Established 1988

Group Covers Many Brands

Electrolux
Spare Parts.

Electrolux is a global appliance manufacturer with numerous brands, some of which are exclusive to specific regions. Identifying the correct spare part can be complex due to multiple appliance variants — sometimes over thirty per type. In most cases, the Product or PNC number on the rating plate is essential.

Identification & Cross-Reference

Many Electrolux spare parts are shared across the group or used on other brands when generic alternatives are unavailable. Correct identification ensures the replacement fits perfectly and avoids ordering errors.

Product / PNC Number
Rating Plate Verification
Cross-Brand Fitment
 

Group Brands & Fitment

Electrolux parts are often compatible across the group. Common brands include:

  • AEG
  • Electrolux
  • Zanussi
  • Parkinson Cowan
  • Tricity Bendix
  • John Lewis (most models)
  • Ikea (most models from 2014 onwards)

Verify Your Electrolux Spare Parts

Provide the Product or PNC number from your appliance’s rating plate and our technical team will confirm the correct Electrolux spare parts for your specific model.

Contact Support Team

Global Appliance Manufacturer • Verified Fitment • Established 1988

NWAR SUPPORT

Spare Parts Help

Identifying technical spares can be a minefield. Our specialist help desk is available via email to cross-reference your model and identify the most cost-effective genuine or alternative options.

Avg. Response Under 60 Minutes
Service Type Expert Verification
Ask A Specialist

Or use the live chat widget below.

UK'S Professional Appliance Spare Part Network • Established 1988

Logistics & Support

Delivery & Returns Information.

We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.

Stock Availability

Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.

Tradesman Warning

Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.

Understanding Lead Times

1 to ** Days

Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.

3 to ** Days

Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.

* to ** Days

Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.

Order Transit

Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.

We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.

Heavy/Oversized Items

Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.

Returns Policy

Damages

Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.

Cancellations

You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).

Exclusions

We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.

How to Return an Item

1

Contact us with your order number and reason for return.

2

Wait for instructions and the correct returns address (this varies by item).

3

Package carefully. Do not deface original packaging. Use tracked post.

Have questions about your delivery or a potential return?

Contact Support Team

98% of orders delivered on time • Expert Resolution • Established 1988

 

Over 1.5 Million Parts in Stock

Ready for quick dispatch and delivery. Our advisors can also help you identify spare parts faster, saving you time.

 
 
Fast Free Advice Mon-Fri, 9am - 5pm
Contact Our Parts Specialists
© NWAR. All rights reserved. Manufacturer logos, images and documentation for informational purposes only.