Cooker Hood Metal Grease Filter
Replacement cooker hood metal grease filter – compatible with Faber, Franke, Roblin and Whirlpool cooker hoods as shown unless advised otherwise
Description
This genuine metal grease filter cassette is identical to the original part fitted at the factory, engineered with multi-layer aluminium mesh inside a rigid perimeter frame.
Built to capture airborne cooking fats, oil mist and steam particles before they reach the internal motor and ducting, it helps maintain steady airflow and keeps kitchen surfaces cleaner.
Produced for selected angled, vertical and chimney cooker hoods across Franke, Roblin, Faber and Whirlpool ranges, this washable cassette features a spring-loaded release catch for easy periodic cleaning. Confirming the exact model name, 10-digit product number, and any production date range listed below ensures the right fit for your hood.
Technical Notes
Specifications: Product code 1330377820. Multi-layer rectangular aluminium cassette grease filter with integrated latch; dimensions 124 x 254 x 8 mm. Weight is not published by the manufacturer. Dimensions alone are not a reliable identifier for any spare part; always confirm fitment using your appliance model number and 10-digit product code, or contact the parts team with your full model and serial details.
Note: Reusable washable aluminium mesh filter; wash regularly in warm, soapy water or on a mild top-rack dishwasher cycle (avoid harsh caustic dishwasher detergents that can tarnish or pit aluminium).
FABER COOKER HOOD
TBC – Please check your model number with our team to confirm fitment.
FRANKE COOKER HOOD
AURA 800 GLASS BK (330.0716.813), FCRV 908 BK (330.0536.839), FCRV 908 BM (330.0536.871), FCRV 908 WH (330.0536.840), FLG 605 BK (330.0678.880), FLG 605 BK/DG/2 (330.0591.771), FLG 805 BK/DG/2 (330.0591.717), FLG 905 BK (330.0678.902), FLG 905 BK/DG/2 (330.0591.716), FMY 606 CO (330.0506.224), FMY 607 BK/2 (330.0507.685), FMY 607 PG/2 (330.0507.711), FMY 806 BK (110.0377.744), FMY 806 CO (330.0506.223), FMY 806 MG (330.0516.990), FMY 806 WH (110.0377.748), FMY 807 BK/2 (330.0507.684), FMY 807 DG (330.0507.714), FMY 807 PG/2 (330.0507.690), FMY 807 WH (330.0507.687), FMY 906 BK (110.0377.742), FMY 906 CO (330.0506.222), FMY 907 BK/2 (330.0507.683), FMY 907 DG (330.0507.712), FMY 907 FM BK/2 (330.0622.743), FMY 907 MG BK/2 (330.0593.253), FMY 907 PG/2 (330.0507.689), FMY 907 WH (330.0507.686), FNO 605 BK/2 (330.0591.778) [From: 03/09/2019], FNO 605 BK EPOQ (330.0701.094), FNO 605 BK incl. reg.ACF (330.0662.303) [From: 03/09/2019], FNO 805 BK/2 (330.0591.775) [From: 03/09/2019], FNO 905 BK/2 (330.0591.773) [From: 03/09/2019], FNO 905 BK EPOQ (330.0701.093), FNO 905 BK incl. reg.ACF (330.0662.305) [From: 03/09/2019], FPJ 615 V BK/DG A/2 (330.0573.294), FPJ 615 V BK/SS/2 (330.0516.054), FPJ 615 V CM/BR (330.0547.034), FPJ 615 V SB (330.0547.031), FPJ 615 V WH/SS/2 (330.0516.056), FPJ 625 V BK/SS/2 (330.0528.064), FPJ 625 V BK/SS UK/2 (330.0590.444), FPJ 625 V WH/SS/2 (330.0528.065), FPJ 625 V WH/SS UK/2 (330.0590.441), FPJ 705 V BK/SS/2 (330.0528.069), FPJ 705 V WH/SS/2 (330.0528.061), FPJ 725 V BK/SS UK/2 (330.0590.445), FPJ 725 V WH/SS UK/2 (330.0590.442), FPJ 825 V BK/SS/2 (330.0584.864), FPJ 825 V WH/SS/2 (330.0584.865), FPJ 915 V BK/DG A/2 (330.0573.295), FPJ 915 V BK/SS/2 (330.0516.052), FPJ 915 V CM/BR (330.0547.033), FPJ 915 V SB (330.0547.036), FPJ 915 V WH/SS/2 (330.0516.055), FPJ 925 V BK/SS/2 (330.0528.067), FPJ 925 V BK/SS UK/2 (330.0590.446), FPJ 925 V WH/SS/2 (330.0528.020), FPJ 925 V WH/SS UK/2 (330.0590.443), FS VT 606 W XS BK (110.0377.356), FS VT 606 W XS BK/SW (110.0433.361), FS VT 606 W XS CH (110.0463.787), FS VT 906 W XS BK (110.0377.358), FS VT 906 W XS BK CCC (110.0474.361), FS VT 906 W XS BK/SW (110.0433.363), FS VT 906 W XS CH (110.0463.802), FS VT 906 W XS CH CCC (110.0474.362), FSMA 605 BK/2 (110.0377.736), FSMA 605 BK CHM (330.0701.141), FSMA 605 WH/2 (110.0377.739), FSMA 805 BK/2 (110.0377.735), FSMA 805 BK CHM (330.0701.142), FSMA 805 WH/2 (110.0377.738), FSMA 905 BK/2 (110.0377.734), FSMA 905 WH/2 (110.0377.737), FSMO 605 BK (110.0377.733), FSMO 805 BK (110.0377.732), FSMO 905 BK (110.0377.731), FVAS A80 BK/2 KL (330.0657.270), FVMY AH BK F90 (330.0679.324), FVMY AH BK F90 UK (330.0685.564), Neo FNO 805 BK incl. reg.ACF (330.0662.306) [From: 03/09/2019], OPALE 800 GLASS BK (330.0732.472)
ROBLIN
CAMELIA 800 BL (330.0563.536), CAMELIA 800 N (330.0563.535), EDEN 900 BL (330.0563.561), EDEN 900 N/2 (330.0563.539), ROMANCE WH/GL A80/2 (330.0497.770) [From: 25.07.2022]
ROBLIN COOKER HOOD
TBC – Please check your model number with our team to confirm fitment.
WHIRLPOOL COOKER HOOD
TBC – Please check your model number with our team to confirm fitment.
Get Expert Cooker Hood Spare Part Help
Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.
| Further Description |
Common Faults & SymptomsThe following physical symptoms are commonly reported on Faber, Franke, Roblin and Whirlpool cooker hoods when a metal grease filter becomes damaged, saturated or unserviceable. Use this as a diagnostic guide before ordering a replacement — if more than one of these is present, the grease filter cassette is the likely culprit. 1
Broken Release Catch Allowing the Filter to Hang or Drop Out
A fatigued spring latch or snapped plastic handle tab stops the cassette from locking into the hood frame, risking the filter dropping onto the hob below.
2
Oil or Grease Dripping Back onto the Hob Surface
When multi-layer aluminium mesh becomes torn, flattened or irreversibly clogged with baked-on fat, condensed grease pools and drips down onto cookware.
3
Bent or Warped Cassette Frame Leaving Gaps Around the Rim
Accidental drops during washing twist the slim aluminium channel, creating perimeter gaps that allow unfiltered greasy vapour straight into the motor housing.
4
Weak Suction & Lingering Steam During Cooking
Dense carbonised grease trapped deep inside the inner mesh layers chokes extraction airflow even after surface wiping, leaving steam hanging above pans.
5
Rattling or Metallic Buzzing When the Fan Runs
Worn rear locating tangs or slack inside a distorted frame allow the cassette to vibrate noisily against the hood opening on medium and boost fan speeds.
6
Corroded, Pitted or Oxidised Mesh & Frame
Repeated exposure to harsh caustic dishwasher tablets etches and weakens the aluminium layers, turning the surface chalky and prone to crumbling.
7
Torn or Separated Mesh Screening
Punctures in the fine mesh reduce grease filtration efficiency and increase fire risk if grease accumulates inside the motor chamber or exhaust duct.
Fitment GuidanceThis part is compatible only with the models listed in the compatibility matrix above or specifically advised by our team. Even if a grease filter looks visually identical, rear locating lug positions and catch geometry vary between cooker hood series.
Diagnostic TipsBefore concluding that the metal grease filter needs replacing, carry out these checks to rule out other causes.
Installation GuideThese steps describe the general procedure. The exact sequence varies between models, so always consult the appliance service manual where available.
Before Ordering, Check These First
Disclaimer: The fault codes and symptoms listed above are intended as a general guide to assist with diagnosis. They cannot be taken as a definitive diagnosis of any particular problem, and other components may produce similar symptoms. Always confirm the fault with proper testing before ordering parts. |
|---|---|
| Alternate Part Number | 133.0377.820, FAB1330377820, C00633213, 8015250945485, 488000633213 |
| EAN Number | 7612981615079 |
| Manufacturer | Low Cost Spare Parts |
| Genuine Part | Yes |
Cooker Hood Filter Specialist
Cooker Hood
Filters
Cooker hood filters come in two main types: grease filters, which prevent grease entering the motor, and carbon/charcoal filters, which remove odours and protect the motor. All hoods require a grease filter, and non-vented hoods should also have a carbon filter fitted. Regular replacement or cleaning is essential for optimal performance.
Filter Replacement Guidelines
- Grease filters: replace every 1–6 months depending on cooking frequency and type
- Carbon/charcoal filters: replace every 3–6 months for optimal odour removal
- Metal mesh grease filters: clean regularly to prevent blockage or damage
- Replacement frequency depends on cooking habits rather than just manufacturer guidelines
Some cooker hood filters are highly model-specific. Images and sizes are for illustration only. Always check compatibility with your specific model to ensure correct fit and performance.
Important: Do not rely solely on images, as filters can appear identical but be incompatible. Always refer to model specifications and contact us if unsure.
Can't Find The Cooker Hood Filter You Need?
Finding the right cooker hood filter can be tricky due to model numbers, serial numbers, and specific filter types. We aim to make it simple, but sometimes a little expert help is needed.
Contact us using our page or email, so we can check compatibility, identify low-cost alternatives, and ensure you receive the correct filter quickly, saving you time, hassle, and money.
Cost-Effective Spare Parts
Save Money On
Spare Parts.
Cost-compatible spare parts are not generic “one-size-fits-all” items. They fall into several categories, and care must be taken to ensure the replacement is fully appropriate for your appliance.
How Compatible Parts Work
Most cost-compatible parts are the same components originally used by the manufacturer but sourced from a different supplier. Often, the brand on your appliance did not manufacture every part themselves. Clever sourcing allows us to provide the exact same part — at a lower cost — sometimes even using a different manufacturer’s part number.
Choosing The Right Replacement
Some compatible parts are excellent, offering the same performance as the original. Others are very cheap but may fail quickly. We evaluate parts before listing and provide guidance so you can avoid low-quality replacements.
Obsolete or Universal Parts
Some original parts are no longer available, so compatible alternatives are the only option. Universal parts may also be used. We only list replacements we trust to ensure quality and fit, protecting you from poor-performing components.
Get Expert Guidance
Contact our technical team for advice on compatible spare parts. We’ll help you select the correct replacement, saving you money while avoiding mistakes and delays.
Contact Support TeamCost-Compatible Parts • Quality Verified • Established 1988
UK'S Professional Appliance Spare Part Network • Established 1988
Delivery & Returns Information.
We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.
Stock Availability
Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.
Tradesman Warning
Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.
Understanding Lead Times
Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.
Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.
Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.
Order Transit
Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.
We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.
Heavy/Oversized Items
Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.
Returns Policy
Damages
Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.
Cancellations
You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).
Exclusions
We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.
How to Return an Item
Contact us with your order number and reason for return.
Wait for instructions and the correct returns address (this varies by item).
Package carefully. Do not deface original packaging. Use tracked post.
Have questions about your delivery or a potential return?
Contact Support Team98% of orders delivered on time • Expert Resolution • Established 1988