Details

Description

This genuine cooker hood carbon filter matches the filter supplied with the appliance when new, restoring effective odour removal in recirculation mode.

As a genuine part, it matches the original manufacturer’s specification for carbon quality, airflow resistance and fit, so it seats correctly in the hood and performs exactly as the original did. Carbon filters trap cooking odours and vapours that pass through the grease filter, and replacing a saturated filter keeps the kitchen fresh and the hood working efficiently.

This circular activated charcoal filter measures 175 mm in diameter and is intended for hoods that recirculate air rather than duct it outside. It fits a number of Amica, Caple, CDA, Gorenje, Matrix, and SIA cooker hood models and is designed to replace the existing carbon filter without modification.

This filter is only known to fit the models shown or as advised and will not fit any others, because even if it looks the same, it probably won't. There will often be several that look alike yet are not, please take time to ensure this is correct before ordering.

Technical Notes

Specifications: Genuine cooker hood carbon filter. Diameter: 175 mm. Media: activated charcoal. Product code: 1197244. The manufacturer does not publish a weight for this filter; confirm fitment by model number or by contacting the parts team with the model and serial number.

AMICA COOKER HOOD

TBC – Please check your model number with our team to confirm fitment.

CAPLE COOKER HOOD

2MINCHP6, 1MBUCHSS2, 2MBUCHSS2, 2MBUCH2, 2MBUCH3, 1MINCH6, 2MINCH6, 2MINCH9

CDA COOKER HOOD

ECA60, ECHK90, ECPK90, ECPK90SS/1, EIN60, EIN60FSI, EIN60SI, EVA60, EVA60BL/1, EVA70, EVA90, STF60

GORENJE COOKER HOOD

WHU629ES, WHU629EW, WHU629EBR, WHU629EB, WHU629AX/M

MATRIX COOKER HOOD

TBC – Please check your model number with our team to confirm fitment.

SIA COOKER HOOD

CPLE90, FL90, CHL100, EAG91

Get Expert Cooker Hood Spare Part Help

Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.

More Info

More Information
Further Description	Common Faults & Symptoms The following symptoms are commonly reported when a carbon filter becomes saturated or damaged. Use this as a diagnostic guide before ordering a replacement — if more than one of these is present, the filter is the likely culprit. 1 Lingering Cooking Odours The most common sign of a saturated carbon filter is that cooking smells remain in the kitchen long after the hood has been running, even on the highest fan speed. 2 Reduced Airflow and Poor Extraction Clogged or saturated filters restrict airflow, so smoke and steam are not drawn away efficiently. You may notice the hood struggling to clear the air during cooking. 3 Filter Visibly Dirty or Saturated The carbon media may appear dark, greasy or matted. Unlike metal grease filters, carbon filters cannot be cleaned or regenerated and must be replaced once saturated. 4 Filter Smells Unpleasant A saturated carbon filter can itself begin to smell unpleasant, especially in humid conditions, because it can no longer adsorb odours effectively. 5 Need for More Frequent Grease Filter Cleaning When carbon filters are saturated, more grease reaches the metal grease filter, causing it to clog more quickly than usual. 6 Condensation on Kitchen Surfaces Poor odour and moisture removal can lead to condensation on windows, walls and cabinets during cooking. 7 Visible Damage to the Filter Casing The frame or mesh around the carbon media may be cracked or deformed, preventing the filter from seating correctly and allowing unfiltered air to bypass it. Fitment Guidance This filter is compatible only with the models listed in the compatibility matrix above. Even if a filter looks visually similar, the diameter, thickness and mounting method can differ between hood ranges. The filter is listed for specific Caple, CDA, Gorenje and SIA cooker hood models. The Amica and Matrix listings are marked TBC, so please confirm your model with the parts team. Your full model number, usually found on the rating plate inside the hood or on the motor housing, must match one of the listed codes exactly. Carbon filters are intended for recirculation mode only; ducted installations do not use them. If your model is not listed, contact the parts team with the model and serial number before ordering. Diagnostic Tips Before concluding that the carbon filter needs replacing, carry out these checks to rule out other causes. CHECK THE GREASE FILTER: A clogged metal grease filter will reduce airflow and prevent the carbon filter from working, even if it is new. CONFIRM THE HOOD IS IN RECIRCULATION MODE: Carbon filters are only effective when the hood recirculates air. If the hood is ducted outside, a carbon filter is not required. INSPECT FOR DAMAGE: Look for tears, crushed sections or loose carbon granules. Any physical damage means the filter should be replaced. RULE OUT DUCTING OR MOTOR FAULTS: If a clean, correctly fitted filter is in place but extraction is still poor, check the ducting for blockages and the motor for faults. Installation Guide These steps describe the general procedure. The exact sequence varies between models, so always consult the appliance instruction manual where available. Switch off the cooker hood and allow it to cool if it has been in use. Remove the metal grease filter to gain access to the carbon filter housing. Release the old carbon filter from its clips or mounting points and remove it from the hood. Clean the housing area before fitting the new filter. Position the new carbon filter in the housing and secure it with the existing clips or fixings. Refit the metal grease filter, then run the hood briefly to confirm normal airflow and no rattling. Before Ordering, Check These First Confirm that the hood is in recirculation mode and actually uses a carbon filter. Check that the metal grease filter is clean and not restricting airflow. Inspect the old carbon filter for saturation, damage or loose granules. Verify that your model number appears in the compatibility list, character for character. If you are unsure, contact the parts team with your full model and serial number before placing an order. Disclaimer: The fault codes and symptoms listed above are intended as a general guide to assist with diagnosis. They cannot be taken as a definitive diagnosis of any particular problem, and other components may produce similar symptoms. Always confirm the fault with proper testing before ordering parts.
Alternate Part Number	CDA1197244, 784407
EAN Number	5060143316593
Manufacturer	N/A
Genuine Part	N/A

Can't Find The Spare Part Or Not Sure?

Buying spares for any appliance can range from a very simple task to one of the most frustrating as you try to pick your way through model numbers, serial numbers and all kinds of information to locate a spare part.

We try to make it as simple as possible for you to buy a spare part, but we are here to help you if you need it.

A lot of information is sometimes needed to make sure you get the correct spare part and, if you don't get it right, then chances are you will get the wrong part, even if they "look" like what you are after. You can read more about how complicated it can be here

This is why we often feel it’s better to ask than to guess. Spare parts can have multiple versions for the same model, production changes, and post-production variations. It’s safer to check with us before you order.

If you're unsure or are trying to identify spares using only photos, contact us for any spare part. We're only too happy to help you make sure you get the correct spares you need—not ones you don’t.

For help in locating the model number of your appliance, please see our reference guide here.

It's best to use our contact page or email as a first resort. This allows us time to look up parts for you, send you photos or diagrams, and find any low-cost compatible spares so you get the best options—including any low-priced compatibles that may be available.

Need Help Finding The Right Spare Part?

We can check compatibility, provide diagrams, and offer low-cost compatible options where available. Just provide your model number or a photo of the part and we’ll guide you to the correct spare.

Contact Our Team

Resources

NWAR SUPPORT

Spare Parts Help

Identifying technical spares can be a minefield. Our specialist help desk is available via email to cross-reference your model and identify the most cost-effective genuine or alternative options.

Avg. Response Under 60 Minutes

Service Type Expert Verification

Ask A Specialist

Or use the live chat widget below.

UK'S Professional Appliance Spare Part Network • Established 1988

Delivery/Returns

Logistics & Support

Delivery & Returns Information.

We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.

Stock Availability

Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.

Tradesman Warning

Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.

Understanding Lead Times

1 to ** Days

Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.

3 to ** Days

Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.

* to ** Days

Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.

Order Transit

Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.

We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.

Heavy/Oversized Items

Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.

Returns Policy

Damages

Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.

Cancellations

You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).

Exclusions

We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.

How to Return an Item

1

Contact us with your order number and reason for return.

2

Wait for instructions and the correct returns address (this varies by item).

3

Package carefully. Do not deface original packaging. Use tracked post.

Have questions about your delivery or a potential return?

Contact Support Team

98% of orders delivered on time • Expert Resolution • Established 1988

Compatible/Related

Cooker Hood Carbon Filter