Cooker Hood Carbon Filters
Replacement cooker hood carbon filter pack – compatible with CDA and Amica as shown unless advised otherwise
Description
This genuine cooker hood carbon filter pack is identical to the filters supplied with the appliance when new, restoring effective odour removal in recirculation mode.
As a genuine replacement set, it matches the original manufacturer’s specification for carbon quality, airflow resistance and fit, so the filters sit correctly in the hood and perform exactly as the originals did.
Carbon filters trap cooking odours and vapours that pass through the grease filter, and replacing saturated filters keeps the kitchen fresh and the hood working efficiently.
The pack contains two activated carbon filters, enough for a complete replacement. They are used across a number of CDA and Amica cooker hood models and is intended for hoods that recirculate air rather than duct it outside. The filters are designed to be fitted in place of the existing carbon filters without modification and form part of routine hood maintenance.
This filter pack is only known to fit the models as shown or as advised and will not fit any others because even if it looks the same, it probably won't be. There will often be several that look alike yet are not, please take time to ensure this is correct before ordering. If you are unsure please don't hesitate to contact us and ask for assistance.
Technical Notes
Specifications: Genuine cooker hood carbon filter pack. Pack quantity: 2 filters. Depth: 180 mm. Width: 180 mm. Weight per pack: 0.48 kg. Material: activated carbon. Product code: 1191756. The manufacturer does not publish a full dimensional tolerance for every variant, but the stated depth and width are the standard fitted size for the models shown. Fitment must always be confirmed by model number or by contacting the parts team with the model and serial number.
AMICA COOKER HOOD
TBC – Please check your model number with our team to confirm fitment.
CDA COOKER HOOD
CCG60BL, EXG60, EXG90, ECH63
Get Expert Cooker Hood Spare Part Help
Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.
| Further Description |
Common Faults & SymptomsThe following symptoms are commonly reported when carbon filters become saturated or damaged. Use this as a diagnostic guide before ordering a replacement — if more than one of these is present, the filters are the likely culprit. 1
Lingering Cooking Odours
The most common sign of saturated carbon filters is that cooking smells remain in the kitchen long after the hood has been running, even on the highest fan speed.
2
Reduced Airflow and Poor Extraction
Clogged or saturated filters restrict airflow, so smoke and steam are not drawn away efficiently. You may notice the hood struggling to clear the air during cooking].
3
Filters Visibly Dirty or Saturated
The carbon media may appear dark, greasy or matted. Unlike metal grease filters, carbon filters cannot be cleaned or regenerated and must be replaced once saturated].
4
Filters Smell Unpleasant
A saturated carbon filter can itself begin to smell unpleasant, especially in humid conditions, because it can no longer adsorb odours effectively.
5
Need for More Frequent Grease Filter Cleaning
When carbon filters are saturated, more grease reaches the metal grease filter, causing it to clog more quickly than usual.
6
Condensation on Kitchen Surfaces
Poor odour and moisture removal can lead to condensation on windows, walls and cabinets during cooking.
7
Visible Damage to the Filter Casing
The frame or mesh around the carbon media may be cracked or deformed, preventing the filter from seating correctly and allowing unfiltered air to bypass it.
Fitment GuidanceThis filter pack is compatible only with the models listed in the compatibility matrix above. Even if a filter looks visually similar, the shape, thickness and mounting method can differ between hood ranges.
Diagnostic TipsBefore concluding that the carbon filters need replacing, carry out these checks to rule out other causes.
Installation GuideThese steps describe the general procedure. The exact sequence varies between models, so always consult the appliance instruction manual where available.
Before Ordering, Check These First
Disclaimer: The fault codes and symptoms listed above are intended as a general guide to assist with diagnosis. They cannot be taken as a definitive diagnosis of any particular problem, and other components may produce similar symptoms. Always confirm the fault with proper testing before ordering parts. |
|---|---|
| Alternate Part Number | CDA1191756, CHA37, CHA37.1 |
| EAN Number | 5055833407262 |
| Manufacturer | CDA Spare Parts |
| Genuine Part | Yes |
Cooker Hood Filter Specialist
Cooker Hood
Filters
Cooker hood filters come in two main types: grease filters, which prevent grease entering the motor, and carbon/charcoal filters, which remove odours and protect the motor. All hoods require a grease filter, and non-vented hoods should also have a carbon filter fitted. Regular replacement or cleaning is essential for optimal performance.
Filter Replacement Guidelines
- Grease filters: replace every 1–6 months depending on cooking frequency and type
- Carbon/charcoal filters: replace every 3–6 months for optimal odour removal
- Metal mesh grease filters: clean regularly to prevent blockage or damage
- Replacement frequency depends on cooking habits rather than just manufacturer guidelines
Some cooker hood filters are highly model-specific. Images and sizes are for illustration only. Always check compatibility with your specific model to ensure correct fit and performance.
Important: Do not rely solely on images, as filters can appear identical but be incompatible. Always refer to model specifications and contact us if unsure.
Can't Find The Cooker Hood Filter You Need?
Finding the right cooker hood filter can be tricky due to model numbers, serial numbers, and specific filter types. We aim to make it simple, but sometimes a little expert help is needed.
Contact us using our page or email, so we can check compatibility, identify low-cost alternatives, and ensure you receive the correct filter quickly, saving you time, hassle, and money.
Spare Part Specialists
CDA
Spare Parts.
Until its acquisition by Amica in 2015, CDA was a pure rebadging brand. Their appliances were sourced from a vast network of global manufacturers, meaning parts sourcing requires high-level technical cross-referencing.
The Multi-Factory Maze
A single "range" of CDA ovens could be produced by numerous different factories across different continents. Visual identification is normally impossible; we rely strictly on various codes on the rating plates to get to the correct technical data.
Don't Guess at CDA Parts
Ordering based on visual similarity is the leading cause of returns for this brand. We strongly advise against guessing. Identifying the original manufacturer of your CDA machine is the key to a successful repair.
Cheaper Alternatives
Because CDA rebadges, we can often source the original component manufacturer (OCM) part at a lower cost than the CDA-boxed version. We identify these functional spares to save you money without compromising safety.
Expert CDA Parts Sourcing
Contact us with your model and production codes, and we will find the most affordable, verified part for your machine.
Contact Support TeamAmica Group Knowledge • Spare Parts Specialist • Established 1988
UK'S Professional Appliance Spare Part Network • Established 1988
Delivery & Returns Information.
We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.
Stock Availability
Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.
Tradesman Warning
Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.
Understanding Lead Times
Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.
Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.
Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.
Order Transit
Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.
We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.
Heavy/Oversized Items
Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.
Returns Policy
Damages
Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.
Cancellations
You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).
Exclusions
We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.
How to Return an Item
Contact us with your order number and reason for return.
Wait for instructions and the correct returns address (this varies by item).
Package carefully. Do not deface original packaging. Use tracked post.
Have questions about your delivery or a potential return?
Contact Support Team98% of orders delivered on time • Expert Resolution • Established 1988