Fan Oven Heating Element 1700w
Replacement fan oven heating element – compatible with Belling, Hisense and Stoves cookers & ovens as shown unless advised otherwise
Description
This genuine fan oven heating element is identical to the original fitted at the factory, delivering dependable 1700W heating for consistent cooking results. Manufactured to exact specifications, it restores even heat distribution and reliable oven performance.
The element fits a range of Belling, Hisense, and Stoves cooker and oven models, making it a versatile replacement for common fan‑oven heating faults.
Technical Notes
Specifications: 1700W fan oven heating element. Dimensions: height 220 mm, width 180 mm, bracket 50 mm, tags 22 mm. Product code: 082662735.
Safety note: This part operates at mains voltage. Isolate the oven from the power supply and allow the element to cool completely before installation. A competent person should carry out the fitting.
BELLING COOKER & OVEN
444411630, 444411631, 444444781, 444444782, 444444783, 444444784, BEL BI703MFC, BI702F, BI702FPCT, BI703MFC
HISENSE COOKER & OVEN
BID75211BGUK, BID75211XUK, BID79222CXUK, BUD714221CX, BUD714221CDBG, BUD714221ADBG, BUD714221AX
STOVES COOKER & OVEN
444410211, 444410212, BI702MFCT
Get Expert Cooker & Oven Spare Part Help
Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.
| Further Description |
Common Faults & SymptomsThe following symptoms are commonly reported when a fan oven heating element begins to fail. Use this as a diagnostic guide before ordering a replacement — if more than one of these is present, the element is the likely culprit. 1
Oven Fails to Heat
The fan and internal lamp may still operate, but no heat is produced — the most common sign of a burned‑out element.
2
Oven Blows Cold Air
The circulation fan runs but the air remains cold, indicating the element is open‑circuit and no longer generating heat.
3
Longer Preheat Times
The oven takes significantly longer than usual to reach the set temperature, often because part of the element has failed.
4
Uneven Cooking Results
Food cooks inconsistently — some areas are undercooked while others burn — because the element no longer distributes heat evenly.
5
Visible Damage to the Element
Cracks, blistering or breakage may be visible on the element surface, confirming physical failure.
6
Oven Trips the Circuit Breaker
A shorted element can cause the mains circuit breaker to trip when the oven is switched on.
7
Intermittent Heating
The oven heats sporadically or cuts in and out, often caused by a failing element that has not yet failed completely.
Fitment GuidanceThis element is compatible only with the models listed in the compatibility matrix above. Even if a part looks visually identical, internal specifications can differ.
Diagnostic TipsBefore concluding that the element has failed, carry out these checks to rule out other causes.
Installation GuideThese steps describe the general procedure. The exact sequence varies between models, so always consult the appliance service manual where available.
Before Ordering, Check These First
Disclaimer: The fault codes and symptoms listed above are intended as a general guide to assist with diagnosis. They cannot be taken as a definitive diagnosis of any particular problem, and other components may produce similar symptoms. Always confirm the fault with proper testing before ordering parts. |
|---|---|
| Alternate Part Number | BEL082662735, STV082662735, 829764, GOR829764, ALT EAN 3838782465536 |
| EAN Number | 082662735 |
| Manufacturer | Stoves Spares |
| Genuine Part | Yes |
Oven & Cooker Spares
Fan Oven
Heating Elements
Fan oven heating elements are the most common cause of an oven failing to heat while the fan and lamp continue to work. They are usually open circuit and require replacement. Most can be replaced from the front of the oven, but a few models need removal from their housing.
The fan oven element (also known as a convection heating element) is the component responsible for heating the air that is then circulated around the oven cavity by the fan. This ensures even heat distribution and consistent cooking results. Over time, the internal filament within the element can burn out or short circuit, leading to a complete loss of heating or intermittent performance.
Signs You Need to Replace Your Fan Oven Element
A faulty fan oven heating element can manifest in several ways. If you're experiencing any of the following issues, this ELE9778 replacement element may be the solution:
-
Oven not heating at all — The most common symptom; the element has likely burned out
-
Oven blowing cold air — The fan runs but no heat is generated
-
Longer preheat times — The oven takes significantly longer than usual to reach temperature
-
Uneven cooking — Food is cooking inconsistently, with some areas undercooked and others burnt
-
Element visibly damaged — Cracks, blistering, or breakage visible on the element surface
-
Oven trips the mains — A shorted element can cause the circuit breaker to trip
Quality & Compatibility
Beware of cheap fan elements sold on auction sites and other sources—they are often poorly made with earthing failures and inferior insulation. We focus on superior quality alternatives, original or better, and avoid selling low-quality components.
Minor changes between element batches may occur, such as removal of the earth tag or differences in mounting. Both are usually easy to accommodate with a little ingenuity.
- Removal of the earth tag—element still safely earthed to chassis
- Changes in mounting method—usually accommodated with screws or bolts
Most elements are easy to fit, and we link genuine heating elements to compatible alternatives that we and technicians would recommend. Cheap and poor-quality elements are not sold.
Care & Maintenance
To maximise the lifespan of your new fan oven heating element:
-
Keep the oven clean — built-up grease and food residue can cause hotspots and premature element failure
-
Don't use abrasive cleaners on the element surface
-
Check the element periodically for signs of damage or wear
-
Ensure the oven fan is working — the element relies on the fan to distribute heat evenly; a faulty fan can cause the element to overheat
Can't Find The Fan Oven Element You Need?
If you’re unsure about compatibility or need help confirming a replacement fan oven heating element, contact us. Provide the model number and as much appliance information as possible. We will check for the correct part and suggest low-cost compatible options where available, saving you time, hassle, and money.
Contact Support Team
Premium GDHA Group Specialist
Stoves
Spare Parts.
Stoves is the premium flagship of the Glen Dimplex Home Appliances group. While famous for British-built range cookers, their wider catalog includes integrated laundry and refrigeration rebadged from global giants like Beko and Candy.
Locating the Technical Data
On Stoves cookers, the model number is often a 9-digit numerical string found on the rating plate around the oven door opening. For rebadged items, look in the standard factory positions.
OEM Architecture
Stoves dishwashers and fridges often use Beko or Candy chassis. We use our technical database to cross-reference these builds, ensuring the spares we provide are the correct functional match for your specific production revision.
Verified Suitability
Don't guess with expensive control boards or thermostats. Minor mid-production updates can change part specifications overnight. Our standing advice: ask our team to verify fitment before you order to prevent returns.
Confirm Your Stoves Parts
Unsure if that element or seal is correct for your range cooker? Send us a clear photo of your rating plate and our technical desk will cross-reference the entire GDHA network for you.
Contact Specialist TeamStoves Technical Expert • GDHA Group Sourcing • Established 1988
UK'S Professional Appliance Spare Part Network • Established 1988
Delivery & Returns Information.
We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.
Stock Availability
Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.
Tradesman Warning
Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.
Understanding Lead Times
Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.
Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.
Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.
Order Transit
Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.
We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.
Heavy/Oversized Items
Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.
Returns Policy
Damages
Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.
Cancellations
You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).
Exclusions
We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.
How to Return an Item
Contact us with your order number and reason for return.
Wait for instructions and the correct returns address (this varies by item).
Package carefully. Do not deface original packaging. Use tracked post.
Have questions about your delivery or a potential return?
Contact Support Team98% of orders delivered on time • Expert Resolution • Established 1988