Metal Cooker Hood Grease Filter

Special Price £30.00 Regular Price £49.36
SKU
08087539
Genuine Part
Typically with you in 2 to 7 days
Commonly used on these brands
Genuine Spare Part

Replacement metal cooker hood grease filter – compatible with AEG, Best, Britannia and other brands as shown unless advised otherwise

Check your cooker hood model number to ensure a guaranteed fit.

 

Description

This genuine metal grease filter matches the filter supplied with the cooker hood when new, restoring effective grease capture and clean airflow.

As a genuine part, it matches the original manufacturer’s specifications for mesh density, frame fit, and finish, so it fits correctly in the hood and performs exactly as the original did. The filter is the first line of defence against grease reaching the motor and ducting, and replacing a worn or damaged one keeps the hood extracting efficiently.

This metal mesh filter is used across a broad range of cooker hoods from several brands, including AEG, Best, Britannia, Diplomat, Electrolux, Gorenje, Hygena, Rosieres, Smeg and Zanussi. It is designed to be removed and cleaned periodically, then slotted back into the existing filter housing without modification.

This filter will only fit the models as shown or as specifically advised and will not fit any others even if it looks the same, it probably won't be as there are several that look alike yet are not. Please take time to ensure this is correct before ordering. If you are unsure please don't hesitate to contact us and ask for assistance.

Technical Notes

Specifications: Genuine metal cooker hood grease filter. Approx. dimensions: 240 mm × 310 mm (24 cm × 31 cm). Approx. weight: 122 g. Material: metal. Product code: 08087539. Approximate dimensions and weights are for guidance only and must not be used to identify the part. Always confirm fitment by model number.

 

AEG COOKER HOOD

DTB3652M, DTB2630M, DTB2630M (94202244900), DTB3652M (94202208100), DTB3653M (94202252000), DTB3654M (94202252200), DTB3953M (94202252100), DTB3954M (94202252300)

 

BEST COOKER HOOD

SIGMA, K 24, K 240, K 26, K 7356, K 508, BHC62351AA, BHC92350AA, BHC61420MA, BHC91420MA, BHC62350AA, BHC92351AA, BHC61420CA, BHC91420CA, BHS96750AA, BHS92350AA, BHS92351AA

 

BRITANNIA COOKER HOOD

K240 90cm & 100cm, K240-90/SS, K240-10/SS, K240-90/K, K240-10/K, K240-90-MB, K240-90-C, K240-10-MB, K240-10-B, K240-10-C, others TBC – Please check your model number with our team to confirm fitment.

 

DIPLOMAT COOKER HOOD

ACA2300, ACA2302, ACA2354, ACA2400, ACA2403, ACA2444

 

ELECTROLUX COOKER HOOD

LFI519X, LFL336A, LFL316A, LFL229X, LFL429A, LFL327A, EFL386A (94202208800), EFL396A (94202208900), LFI519X (07L08150B), LFI519X (94205100000), LFL229X (94202208400), LFL316A (94202208300), LFL327A (94202208700), LFL336A (94202208200), LFL429A (94202208500)

 

GORENJE COOKER HOOD

415127, 415129, DK63CLI, DK63CLB, 492947, 492949, 415127 (07003448), 415127 (94202231800), 415127 (94202250800), 415129 (07003449), 415129 (94202231900), 415129 (94202250900), 492947 (94202221800), 492949 (94202221900), DK63CLB (07003451), DK63CLI (07003450)

 

HYGENA COOKER HOOD

APP2180

 

ROSIERES COOKER HOOD

RDR91/2AV, RDR61/2AV, RDR91/2BAV

 

SMEG COOKER HOOD

K24, K240, K24 (07001743), K24 (07001744), K240 (07003270)

 

ZANUSSI COOKER HOOD

ZHS92650XA, ZHC62352X, ZHC62653XA, ZHC92352X, ZFI719A (94205137100), ZFIX19A (94205138500), ZFL328K (94202264600), ZFL328X (94202264500), ZFLX26K (94202264400), ZFLX29K (94202264300), ZHC62352X (94202209700), ZHC62653XA (94202209800), ZHC92352X (94202209900), ZHC92653XA (94202251500), ZHS92450XA (94205100300), ZHS92650XA (07L08450B), ZHS92650XA (07L08451B), ZHS92650XA (94205100100), ZHS92650XA (94205100200), ZHS92650XA (94205144300)

 

Get Expert Cooker Hood Spare Part Help

Can't find your model number listed or need help identifying the correct part? Contact our parts advisors with your full model and serial number, and we'll verify the correct part for your appliance.

More Information
Further Description

Common Faults & Symptoms

The following symptoms are commonly reported when a metal grease filter becomes worn, damaged or saturated. Use this as a diagnostic guide before ordering a replacement — if more than one of these is present, the filter is the likely culprit.

1
Reduced Extraction Performance
A clogged or damaged grease filter restricts airflow through the hood, so steam and cooking odours are not removed as effectively as they should be, even on the highest fan setting.
2
Visible Grease Build-Up on the Hood
Thick, sticky grease may remain on the filter after cleaning, or grease may be visible on the hood canopy and surrounding surfaces, indicating that the filter is no longer trapping grease properly.
3
Persistent Cooking Odours in the Kitchen
Odours linger after cooking because the filter is saturated or damaged and cannot allow enough air to pass through the hood, even after the fan has run for some time.
4
Filter Does Not Sit Securely in the Housing
A bent, warped or damaged filter may not clip into the hood correctly, leaving gaps around the edges where grease and fumes can bypass the filter.
5
Rattling or Vibrating Noise During Use
A loose or distorted filter can rattle against the hood body when the fan is running, particularly at higher speeds or after the hood has recently been cleaned.
6
Grease Dripping from the Hood
When the filter is saturated or damaged, grease can pass through and collect inside the hood, eventually dripping onto the hob or worktop below.
7
Filter Mesh Damaged or Corroded
Visible holes, tears, crushed mesh or corrosion mean the filter can no longer trap grease effectively and should be replaced rather than cleaned.

Fitment Guidance

This filter is compatible only with the models listed in the compatibility matrix above. Even if a filter looks visually similar, the frame dimensions, clip positions and mesh pattern can differ between hood ranges.

  • The filter is listed for specific AEG, Best, Britannia, Diplomat, Electrolux, Gorenje, Hygena, Rosieres, Smeg and Zanussi cooker hood models.
  • Your full model number, usually found on the rating plate inside the hood or on the motor housing, must match one of the listed codes exactly.
  • Do not rely on the external appearance of the old filter alone — the frame dimensions and fixing method can vary between revisions.
  • If your model is not listed, contact the parts team with the model and serial number before ordering.

Diagnostic Tips

Before concluding that the filter needs replacing, carry out these checks to rule out simple cleaning or fitting issues.

  • CLEAN THE FILTER: Metal grease filters can often be restored by soaking in hot soapy water and brushing gently. If grease remains after cleaning, replacement may be needed.
  • CHECK THE CLIPS AND FRAME: Ensure the filter is seated squarely and that all retaining clips are engaged. A loose filter can mimic poor extraction.
  • INSPECT FOR DAMAGE: Look for crushed mesh, holes, tears or corrosion. Any physical damage means the filter should be replaced.
  • RULE OUT DUCTING OR MOTOR FAULTS: If a clean, undamaged filter is fitted correctly but extraction is still poor, check the ducting for blockages and the motor for faults.

Installation Guide

These steps describe the general procedure. The exact sequence varies between models, so always consult the appliance instruction manual where available.

  1. Switch off the cooker hood and allow it to cool if it has been in use.
  2. Release the retaining clips or latches that hold the old grease filter in place.
  3. Lower the old filter out of the hood, taking care not to let grease drip onto the hob.
  4. Clean the filter housing and surrounding area before fitting the new filter.
  5. Position the new filter squarely in the housing and engage all retaining clips.
  6. Check that the filter is secure and sits flush, then run the hood briefly to confirm normal airflow and no rattling.

Before Ordering, Check These First

  • Confirm that the existing filter cannot be restored by thorough cleaning.
  • Inspect the old filter for physical damage, corrosion or crushed mesh.
  • Check that the filter is seated correctly and all clips are engaged.
  • Verify that your model number appears in the compatibility list, character for character.
  • If you are unsure, contact the parts team with your full model and serial number before placing an order.

Disclaimer: The fault codes and symptoms listed above are intended as a general guide to assist with diagnosis. They cannot be taken as a definitive diagnosis of any particular problem, and other components may produce similar symptoms. Always confirm the fault with proper testing before ordering parts.

298MM X 236MM

Alternate Part Number 08087625, 80875396, 74X3809, 5055002133107, BRTSP-B08087539, BRTSP-B08087625, DST80875396
EAN Number 08087539
Manufacturer Hygena
Genuine Part Yes

Cooker Hood Filters Cooker Hood Filter Specialist

Cooker Hood
Filters

Cooker hood filters come in two main types: grease filters, which prevent grease entering the motor, and carbon/charcoal filters, which remove odours and protect the motor. All hoods require a grease filter, and non-vented hoods should also have a carbon filter fitted. Regular replacement or cleaning is essential for optimal performance.

Filter Replacement Guidelines

  • Grease filters: replace every 1–6 months depending on cooking frequency and type
  • Carbon/charcoal filters: replace every 3–6 months for optimal odour removal
  • Metal mesh grease filters: clean regularly to prevent blockage or damage
  • Replacement frequency depends on cooking habits rather than just manufacturer guidelines

Some cooker hood filters are highly model-specific. Images and sizes are for illustration only. Always check compatibility with your specific model to ensure correct fit and performance.

Important: Do not rely solely on images, as filters can appear identical but be incompatible. Always refer to model specifications and contact us if unsure.

Read why this is important here

Can't Find The Cooker Hood Filter You Need?

Finding the right cooker hood filter can be tricky due to model numbers, serial numbers, and specific filter types. We aim to make it simple, but sometimes a little expert help is needed.

Contact us using our page or email, so we can check compatibility, identify low-cost alternatives, and ensure you receive the correct filter quickly, saving you time, hassle, and money.

Contact Support Team
Hygena MFI Legacy & Diplomat Specialist

Hygena
Spare Parts.

Hygena was the flagship "budget" brand for the now-defunct MFI group. Specialising in built-in and integrated appliances, we have a wealth of technical experience spanning decades of Hygena and Diplomat production runs.

The AHY Format Requirement

A common mistake is using names like "Select 600" or "900"—these are marketing names and cannot be used for part identification. For 100% accuracy, we require the true model number found on the rating plate.

AHYxxxx Format
Rating Plate Only
Verified Fitment
 

Ignore the Handbook

Instruction manuals for Hygena appliances are generic and often cover a dozen different builds. To find functional spares that actually fit, you must obtain the data directly from the machine’s physical rating plate.

 

Technical Expertise

Because MFI no longer exists, identifying "who built what" for Hygena is a technical puzzle. We use our legacy databases to cross-reference rebadged parts and provide the correct match for your specific appliance.

Confirm Your Hygena Spares

Unsure if that element or pump is the correct one for your AHY model? Our technical team is happy to assist you in verifying fitment before you order.

Contact Support Team

Hygena & Diplomat Specialist • Legacy Support • Established 1988

NWAR SUPPORT

Spare Parts Help

Identifying technical spares can be a minefield. Our specialist help desk is available via email to cross-reference your model and identify the most cost-effective genuine or alternative options.

Avg. Response Under 60 Minutes
Service Type Expert Verification
Ask A Specialist

Or use the live chat widget below.

UK'S Professional Appliance Spare Part Network • Established 1988

Logistics & Support

Delivery & Returns Information.

We aim to get your parts to you as fast as possible. We are transparent about lead times, stock availability, and our returns process to ensure a smooth repair.

Stock Availability

Please be aware that we show availability but do not display live stock levels online. Estimates are based on average manufacturer lead times.

Tradesman Warning

Do not arrange a tradesman until your goods have arrived and been checked. We do not cover tradesman costs due to transit delays or suitability issues.

Understanding Lead Times

1 to ** Days

Normally a UK stock item. Dispatched same or next working day. Some items may take longer depending on specific warehouse location.

3 to ** Days

Usually a UK/EU stocked item but with a longer lead time. Contact us before ordering for specific clarification if the repair is urgent.

* to ** Days

Factory or Custom order items. These are ordered specifically for you and cannot ordinarily be returned. Please allow the full time indicated.

Order Transit

Orders placed before 3:00 PM (Mon-Fri) for in-stock items are typically dispatched same-day.

We use Royal Mail, DPD, and Evri. Tracking information is emailed upon dispatch. Delivery times to rural or offshore areas will vary.

Heavy/Oversized Items

Items such as dishracks, tubs, and glass cooktops may incur additional fees due to weight and specialised packaging requirements. We will contact you if additional shipping is required.

Returns Policy

Damages

Report transit damage within 24 hours. Include a photo of the damage and the packaging to speed up the claim process.

Cancellations

You have 14 days after delivery to cancel. This must be done via email or support ticket (not phone/chat).

Exclusions

We cannot accept returns for items that have been fitted for fault-finding, used, or custom-ordered.

How to Return an Item

1

Contact us with your order number and reason for return.

2

Wait for instructions and the correct returns address (this varies by item).

3

Package carefully. Do not deface original packaging. Use tracked post.

Have questions about your delivery or a potential return?

Contact Support Team

98% of orders delivered on time • Expert Resolution • Established 1988

 

Over 1.5 Million Parts in Stock

Ready for quick dispatch and delivery. Our advisors can also help you identify spare parts faster, saving you time.

 
 
Fast Free Advice Mon-Fri, 9am - 5pm
Contact Our Parts Specialists
© NWAR. All rights reserved. Manufacturer logos, images and documentation for informational purposes only.